Doctrt Posted April 5, 2007 Report Share Posted April 5, 2007 Hi Guys and Gals. I'm looking for a little advice. I'm thinking of putting a casting platform on my 14ft. aluminum boat this spring. I understand there is a spray on product to treat marine plywood as well as a plastic wrap for the wood that is available. Any suggestions / advice from some experienced deckers?? Thanks in advance. Tim Link to comment Share on other sites More sharing options...
Joey Posted April 5, 2007 Report Share Posted April 5, 2007 In our old tinny, we just bought regular plywood, cut it to fit and put indoor/outdoor carpeting on it. It was fine. Joey Link to comment Share on other sites More sharing options...
Deano Posted April 5, 2007 Report Share Posted April 5, 2007 I used 3/4 inch plywood (sturdy) put some good woodstain on it and then covered with carpet. Almost 10 years now and still good Link to comment Share on other sites More sharing options...
keram Posted April 5, 2007 Report Share Posted April 5, 2007 Are you sure that you need only casting platform ? This is my 14' aluminum Before after Link to comment Share on other sites More sharing options...
easton13th Posted April 5, 2007 Report Share Posted April 5, 2007 Not sure of the plastic wrap, that might hold moisture. Link to comment Share on other sites More sharing options...
misfish Posted April 5, 2007 Report Share Posted April 5, 2007 This is what I did to mine before I sold it. It was just a shell like yours. Any questions just ask. Link to comment Share on other sites More sharing options...
shawnf Posted April 5, 2007 Report Share Posted April 5, 2007 (edited) Here's an excellent article on Wiki with a list of different finishes a person could use. Nice chart to tell you whats durable, protection required, etc. http://en.wikipedia.org/wiki/Wood_finishing Hope that helps! Edited April 5, 2007 by Shawn F. Link to comment Share on other sites More sharing options...
Bitsmith2k Posted April 5, 2007 Report Share Posted April 5, 2007 <drools> i love that boat.. Link to comment Share on other sites More sharing options...
Slowhand Posted April 5, 2007 Report Share Posted April 5, 2007 misfish: love the tin boat! I'm planning to fix up my father's (RIP) this summer. Floatation: did you replace the styrafoam under the seats? If yes, how? Rivet leaks: did you have any: If yes, how did you repair them? Paint: Looks like you painted the hull but I can't be sure: If yes what did you use. Thanks a lot. Link to comment Share on other sites More sharing options...
misfish Posted April 5, 2007 Report Share Posted April 5, 2007 (edited) Thanks slow Who you asking.LOL The live well,I just cut out the foam that was the same size as the well.Replaced nothing.The seats have 14 inches of solid white styro. Under the front seat I installed another storage spot. It did hold the battery for the trolling motor,but then moved it to the back. I never coated mine,it does look like Keram might have. As for sealing the floor. I just used 5/8 ply and painted it with a good oil paint.Then I wrapped the sections with the carpet. It is a bit of trial and error to get the support hights and floor to fit exact,I used big pieces of cardboard to get my shapes then just traced them on to the wood. Edited April 5, 2007 by misfish Link to comment Share on other sites More sharing options...
Terry Posted April 5, 2007 Report Share Posted April 5, 2007 make the front seat, pole and bracket as strong as you can, then make it even stronger....visitors will thank you...trust me on this one....lol Link to comment Share on other sites More sharing options...
Zib Posted April 5, 2007 Report Share Posted April 5, 2007 Looks like you did a really nice job modifying your boat Keram. How has the extra weight effected how it rides in the water? Link to comment Share on other sites More sharing options...
misfish Posted April 5, 2007 Report Share Posted April 5, 2007 CHUT UP Link to comment Share on other sites More sharing options...
Terry Posted April 5, 2007 Report Share Posted April 5, 2007 misfish, is that directed at me.....LOL...but I bet you still laugh every time you think about me crashing to the deck.....yeah Link to comment Share on other sites More sharing options...
davis Posted April 5, 2007 Report Share Posted April 5, 2007 This is what I did to mine before I sold it. It was just a shell like yours. Any questions just ask. i miss the sylvan. all locked up (in a warm, safe spot) just waiting to get back onto the open water. hopefully sooner than later!! Link to comment Share on other sites More sharing options...
misfish Posted April 5, 2007 Report Share Posted April 5, 2007 misfish, is that directed at me.....LOL...but I bet you still laugh every time you think about me crashing to the deck.....yeah Me laugh at you................................................. Why sure,what ya going do about it, Davis glad yer enjoying the boat. Told ya you were going to. Did ya ever get out with the riggers? Link to comment Share on other sites More sharing options...
davis Posted April 5, 2007 Report Share Posted April 5, 2007 Yes sir - had a good season with her last year, and hoping for an even better one this year. Didn't make any of my own modifications, but I think i'll tweak some things when i get her out in the next couple of weeks...just because! Didn't use the riggers at all last year, unfortunately. That will change this year for sure. Link to comment Share on other sites More sharing options...
keram Posted April 5, 2007 Report Share Posted April 5, 2007 Looks like you did a really nice job modifying your boat Keram. How has the extra weight effected how it rides in the water? I wish I had an answer for you. The problem is I 've never run this boat before modyfication. What I can say is this: In addition to the wood, carpet, floor support etc. on my first test run I've had also battery, trolling motor, full tank of gas (6 gal), big tacle box and probably another 50 lb in other staff ( good to have it just in case ) and me ( 220 lb ), I've managed 25 km/hr (about 15+ miles/hr) with 9.9 HP mercury. It is good for me, I'm fishing, not racing Link to comment Share on other sites More sharing options...
fishboy Posted April 6, 2007 Report Share Posted April 6, 2007 Nice "reno" work boys! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now