oxcowboy Posted July 9, 2007 Report Share Posted July 9, 2007 hi folks, i got a quick question for you power pro users. i have a spool of 80 lb and was wandering if i could use it instead of a steel leader for pike fishing. i know that i would have to retie from time to time, but i hate the way some of my crank baits work when they are attached to a steel leader. would it be worth it, or would i still have to many bite-offs to make it worth while. any advice would be greatly appreciated. jason Link to comment Share on other sites More sharing options...
bassjnkie Posted July 9, 2007 Report Share Posted July 9, 2007 Funny you post this. I used PP as a leader for pike for years, with a clip addatched to the lure for more action. I did notice the lures dives deeper. Yes, you have to retie after every few fish. Hope this helps, Daniel OCH Link to comment Share on other sites More sharing options...
Roy Posted July 9, 2007 Report Share Posted July 9, 2007 I would never use any kind of braid as a leader for esox. Esox, (pike and muskie) have serrated teeth and will cut through braid no problem. Walleye on the other hand have conical teeth and have trouble breaking braid. Rather than using a steel leader why don't you go to a fluoro leader. I think the fluoro will have less of an effect on your lure's action. Link to comment Share on other sites More sharing options...
Raf Posted July 9, 2007 Report Share Posted July 9, 2007 always use a wire or fluoro leader for pike or muskie. they will slice through braid like a hot knife through butter. it may not happen tomorrow, but believe me it will happen and when it's a trophy that you've just lost you'll be kickin' yourself. Link to comment Share on other sites More sharing options...
jediangler Posted July 9, 2007 Report Share Posted July 9, 2007 Unless you don't care if you lose the odd fish PP would be OK. Why don't you try flourocarbon? I trust only steel and titanium for musky fishing. How long do you think PP would last in this mess of teeth? Link to comment Share on other sites More sharing options...
redfin Posted July 9, 2007 Report Share Posted July 9, 2007 Don't do it! I learned my lesson the hard way :wallbash: . I'm going back to metal stuff. Link to comment Share on other sites More sharing options...
musky66 Posted July 9, 2007 Report Share Posted July 9, 2007 Floro rocks! I use 130 for Musky and 80 for Pike and Walleye. I don't need it for Walleye but there are also Pike or Musky where I Walleye fish- the floro leader doesn't seem to scare off the Walleye I am casting or trolling for! You should see the damage a house cat will do to braid! Link to comment Share on other sites More sharing options...
muskymatt Posted July 9, 2007 Report Share Posted July 9, 2007 I agree with the rest....I was bit off running a topwater directly tied with 30lb PP by a nice pike....it was so quick I was stunned. Fluoro is best, even if your leader is only 8", it will work. Link to comment Share on other sites More sharing options...
Rich Clemens Posted July 9, 2007 Report Share Posted July 9, 2007 I always use a leader when targeting Pike or Musky. I've gone to 2 Ft. Flouro for casting and 3 Ft. for trolling. I started out using a 12" leader and my wife lost her very first musky because the fish nicked the line. (She's still waiting for her first one). I'll let out the words that were said, but after that, I've gone a bit longer. Don't risk losing a good fish ... use a leader if you are specifically targeting these species. It's good too to lessen the chances of a line breaking and a fish swimming off with a bunch of hooks still embedded. Good post and you'll get a lot of good responses. Link to comment Share on other sites More sharing options...
bassmaster4 Posted July 10, 2007 Report Share Posted July 10, 2007 will walleye bite through 10 lbs p-line? Link to comment Share on other sites More sharing options...
addict Posted July 10, 2007 Report Share Posted July 10, 2007 i priced heavy floro for esox and its stupid expensive.use steel and there wont be lost fish or dollars.unless they miss the lure and hit the main line this has happened to me on a few trips. Link to comment Share on other sites More sharing options...
Roy Posted July 10, 2007 Report Share Posted July 10, 2007 Fishtat2, that's the problem, you may not lose fish with the steel leader but when the fish rolls, you'll scar her enough with the steel that she might die anyway. Use Fluoro. IMHO. Link to comment Share on other sites More sharing options...
evster Posted July 10, 2007 Report Share Posted July 10, 2007 How much does heavy flouro tend to cost? Link to comment Share on other sites More sharing options...
oxcowboy Posted July 10, 2007 Author Report Share Posted July 10, 2007 i looked on ebay and 3 36" leaders that were 60#test was 3.99. how heavy do you need for piking? thanks for all of the info so far guys. jason Link to comment Share on other sites More sharing options...
danw Posted July 10, 2007 Report Share Posted July 10, 2007 I had a pike break my steel leader one time. It broke off just as it entered the boat. Link to comment Share on other sites More sharing options...
mepps Posted July 11, 2007 Report Share Posted July 11, 2007 (edited) I have caught alot of big pike with no leaders and 50lb PowerPro - but I've made the switch to flurocarbon and am VERY happy I did! I used 80lb fluro this spring with no trouble at all - just some little scrathces on teh fluro - the pike in the profile pic was caught on 80lb fluro Edited July 11, 2007 by mepps Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now