ilario Posted May 29, 2007 Report Posted May 29, 2007 Hey there: What might be the approximate weight difference between an aluminum boat and an equivalent size fiberglass? e.g. a 14' aluminum utlity boat is roughly 200-225lb. Would the fiberglass weigh twice as much? thanks
Fisherman Posted May 30, 2007 Report Posted May 30, 2007 (edited) We just transported a couple of Lowe 1462 models, 180 lbs each, I would think you are right about double the weight. Edited May 30, 2007 by Fisherman
ilario Posted May 30, 2007 Author Report Posted May 30, 2007 We just transported a couple of Lowe 1462 models, 180 lbs each, I would think you are right about double the weight. So on average, they're about twice as heavy?
irishfield Posted May 30, 2007 Report Posted May 30, 2007 (edited) All depends who did the glass work. You can give 100 guys the parts to build in alum and it will always be the same weight. Fiberglass built by historic (chop gun) you'll have a 100 different boat weights in Glass. Someone doing it right by the infusion process (that not many, if any, boat builders use) it will be close each time. With smaller stuff even by that process, to get a minimum workable thickness, it will still weight at least 60 to 70 % more than alum. Once you get into bigger stuff it can be made comparable in weight to alum. Edited May 30, 2007 by irishfield
POLLIWOGG Posted May 30, 2007 Report Posted May 30, 2007 Age of the boat will make a difference as new glass boats are built a lot lighter than old ones.
Fish Farmer Posted May 30, 2007 Report Posted May 30, 2007 It's Actually a myth. very little difference. I've had both. Glass seems to stand up better when pounding the big water, and a little quieter. Some glass boats are built better than others, goes for aluminum also. It's what you pay for. If I had to do it over, I'd go for a HarberCraft or Stanley boat. But your going to pay. They will be the last one you'll have to buy. Unless you get 2 foot iteis.
aplumma Posted May 30, 2007 Report Posted May 30, 2007 I will stick to Aluminum for all of my boats. The 28 ft Marinette is aluminum and it weighs in at 7200 lbs were a 28 ft four Winn's fiberglass is 9800 lbs the kicker is the Marinette has twin 318's and the four winns has the single volvo setup. The aluminum does not become porous over time and survives impacts with debris in the river better. Being lighter also makes for better fuel economy and less maintenance on the bottom painting. Art
ilario Posted May 30, 2007 Author Report Posted May 30, 2007 thanks fellas... Irishfield, did you get the lures?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now