Jump to content

I have an engine start problem, please advise.


Old Ironmaker

Recommended Posts

We started to winterize my 95 Merc Mariner 115 HP yesterday. All was well until it was time to start the motor. No spark. I haven't had any start up problems all year that is until the last run 2 weeks ago. She usually fires up on a second or maybe third crank. However 2 weeks ago it took at least 6 tries before she fired.

 

Yesterday nothing. Plenty of fuel. Put the spark tester on her and have nothing. ( cheap tester is suspect). The only thing out of the ordinary was that we found 1 bolt of 2 missing from the top of the powerpac. I thought it may have worked it's way out somehow, unlikely, but the bolt isn't at the bottom of the engine. Featherstone Ted looked in his Merc manual last night and we are going to work from the fuse panel back this afternoon after I pick up a proper spark tester. The 7.99 indicated from CTC is suspect, put it on the truck and sometimes it shows spark, sometimes not.

 

Any suggestions? Hopefully by the time I check here she's done.

 

Any help is greatly appreciated.

 

Johnny D

Link to comment
Share on other sites

I usually check spark using one of the spark plugs.

Pull plugs out and plug one into a plug wire and ground out against the engine.

Watch for the spark to jump across the plugs gap.

 

First thing to do if you find that there is indeed no spark is to test the CDI unit and the Stator assembly.

I have info at home on my 1991 Merc that should cover this in the Merc repair manual I have.

I can send you the pertinent info if you like.

If so PM me your email address and I'll try to do it after lunch today. ;)

Link to comment
Share on other sites

Thank you Drifter and JohnBacon for your replies. Yes it was something simple JB. Like putting the kill switch in the off position when I was cleaning the interior Sunday. Like I said to Drifter I don't know whether to laugh or cry, I choose to laugh because I don't need to BOAT right now/ bring out another thousand!

Link to comment
Share on other sites

Simple but often over looked. I remember trying to start my sled one time, I had taken my helmet off and set it down (on the kill switch). I cranked and cranked and was ready to start taking things apart (with a hammer) picked up my helmet to walk back into the house and realized that the kill switch was right under the helmet. Started first pull after that. Don't feel bad, anyone that claims it never happened to them is probably not being too honest! :whistling:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Topics

    Popular Topics

    Upcoming Events

    No upcoming events found

×
×
  • Create New...