tizfun Posted June 7, 2012 Report Posted June 7, 2012 Hey all, It's been a while since I've posted and every time I do, you all are willing to help me out.. Well, here's the scoop.. Money is tight !! Since my divorce took away my last boat, I'm now in the market at a used (new to me) again.. I'm looking at a couple and are powered by either motor 1996 150 hp Fast Strike and the other with a 1997 175 hp Intruder. What are your opinions on these motors ?? Would or have you owned one before ?? I know the 1998 Fitch and the Opitmax in this year are not good, so any comments and advice would be appreciated.. Thanks, Tiz
ecmilley Posted June 7, 2012 Report Posted June 7, 2012 they were the best engines omc built, do a compression check on them thre were pretty much bullitproof other than the odd vro failure in the oil mixing
Garnet Posted June 7, 2012 Report Posted June 7, 2012 I had the 175 rude. As mentioned VRO were problem. Power Packs $300 were problem. Think they are cheaper after market. Before blowing money on power pack the cheapest sensor is under your dash about $14 it controls your beeper. At the front of the motor are 2 small boxes. Bose relays about $4 at Auto Parts store $15 at marina. They control your trim. If your motor goes up and not down switch them around. They both need to be plugged in. The 150 Strike is same motor everything applies.
tizfun Posted June 8, 2012 Author Report Posted June 8, 2012 Thanks for the tips and things to watch out for .. Will be US bound to bring it home.... Thanks, Tiz
Billy Bob Posted June 8, 2012 Report Posted June 8, 2012 My 1985 50hp VRO Johnson is still going strong.......love not having to mix oil.
craigdritchie Posted June 8, 2012 Report Posted June 8, 2012 +1 to comments above. The 150 and 175 are the same engine, just tuned differently. Don't touch a Ficht at any price.
Bernie Posted June 8, 2012 Report Posted June 8, 2012 I have nothing but good things to say about my Ficht Craig. It's been a very good engine.
ecmilley Posted June 8, 2012 Report Posted June 8, 2012 I have nothing but good things to say about my Ficht Craig. It's been a very good engine. yes Bernie but you also know that we turn wrenches for a living and understand the engineers came out with a pm schedule for a reason and we will usually follow it on our own equipment cause who wants to work on there equipment when everyone else is fisihing
craigdritchie Posted June 8, 2012 Report Posted June 8, 2012 I have nothing but good things to say about my Ficht Craig. It's been a very good engine. Then you're one of the lucky ones, Bernie. That seems to be the thing with Ficht - while some owners have great experiences with them, many more have nothing but headaches. There doesn't seem to be any middle ground.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now