knightfisher Posted March 17, 2012 Report Posted March 17, 2012 I've had this endura for about five years and it has served me well. Notice I don't get the power I use to. Changed batteries and still not preforming like it use to. I was just wondering if anyone knows what the life of these motors are, or if there is something I can do to improve the preformance. Thanks, Dan
ah_long Posted March 17, 2012 Report Posted March 17, 2012 Did you remove the prop and see if its jammed with weeds?
davey buoy Posted March 17, 2012 Report Posted March 17, 2012 I have the same,about 5 years old,runs like the day I bought it.Maybe weeds as said or spinning because something broken.Under load is when the trouble would show up likely.
Roy Posted March 17, 2012 Report Posted March 17, 2012 I agree, take the prop off and remove the fishing line.
BassAsin Posted March 19, 2012 Report Posted March 19, 2012 Try changing the prop if there is no line stuck on your drive Shaft the props will wear on the slot where the sheer pin is and you will lose speed. Happened on my endurance as well as Minn kota after only a couple years.
knightfisher Posted March 19, 2012 Author Report Posted March 19, 2012 Thanks for the replies. Took the prop off no line or weeds. I do check for that a few times a year. May try a new prop. Dan
fish_fishburn Posted March 19, 2012 Report Posted March 19, 2012 Charge your batteries and then do a specific gravity test. Maybe your batteries are getting a bit tired. If they are put some re-store in your batteries and recharge. The Re-store will bring them back like new.
Dabluz Posted March 19, 2012 Report Posted March 19, 2012 I had a Minn Kota 15 (9 lbs of thrust) for close to 30 years. When I sold it 2 years ago, it was as strong as the day I bought it. I could get about 10 km/h in high when I used it on my canoe. However, 3 years ago I got a 36 lb thrust bowmount made in 1999. It worked a couple of minutes and slowly came to a stop. I just took it apart today and the inner bearing is damaged. The shaft has not been damaged though. Anyway, taking the motor apart only takes about 2 minutes. You may just need new brushes and bearing (bearings?) There is a site on the internet where you can ask a pro questions about these kinds of things but it costs too much for the info.
barrystrs Posted March 19, 2012 Report Posted March 19, 2012 When I replaced my prop with a weedless one from crappy tire, it is faster than it ever was, and it is truely weedless in forward.
Garnet Posted March 19, 2012 Report Posted March 19, 2012 Clean contacts is huge. Pop the top off and shine those contacts, make sure your battery post are clean and shiny. Put a little dab of white grease. So battery,contacts,motor.
RSF Posted March 20, 2012 Report Posted March 20, 2012 You might check and clean all power contact points of the lines, clamps/connector as well as threaded connectors from batt-up, including any crimped ends. I Just purchased a new MInn Kota Endura C-2-50 for the unheard of price 189.00. Includes Manufacture rebate $50.00 and a free 5 amp logic controlled 5amp MK Charger. Lebarons. I believe the sales ends, the end of the month (March).
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now