Guest ThisPlaceSucks Posted January 18, 2011 Report Posted January 18, 2011 (edited) we had a swede bore last time i went out and i fished the same 3 holes all day. Edited January 18, 2011 by Dr. Salvelinus
SlowPoke Posted January 19, 2011 Report Posted January 19, 2011 +1 for Nils Master I never would have believed the hype if I hadn't seen it in action. As Jocyln says, you can be fishing before the other guy can have his gas auger started.
skeeter Posted January 19, 2011 Report Posted January 19, 2011 Well there seems to be a difference in opinion here. the fin bore3 seems to be in the lead. so i am here to set the record straight..... the best auger in the world is the auger your friend is using to cut your holes for you. hands down I WIN !!!!!!!!!
misfish Posted January 19, 2011 Report Posted January 19, 2011 +1 for Nils Master I never would have believed the hype if I hadn't seen it in action. As Jocyln says, you can be fishing before the other guy can have his gas auger started. Especially if it,s Terrys auger,,,,,,,
bobowski Posted January 20, 2011 Report Posted January 20, 2011 I have an 8' FinBore III and it works like a charm. I too didn't know if I should get a 6 inch or an 8 inch but in the end decided to go with the 8 inch on the thought of how disapointed I would be if I lost a trophy at the hole because the hole was too small.
porkpie Posted January 20, 2011 Report Posted January 20, 2011 4 years ago when I wanted a new auger, I bought a fin bore III and a Nils master, both 6 inches. I actually bought the finbore first, and then unexpectedly found the nils in a bait shop that I occasionally frequented. I picked it up figuring I could sell one if I liked the other better, and I had heard so much about the nils that I had to try it. Long story short, I sold the finbore 2 weeks later, and I've never looked back. It is without a doubt the best manual auger I have ever owned. I have owned several different manuals, and 2 gas augers, both eskimo. It is unlikely that I will ever need a gas auger again, but if I do get the urge, I will be buying the nils/tanaka gas combo. I have 4 seasons now on the original cutting head, and it still cuts like the day I bought it. I have pulled lakers and whities through the 6 inch hole with no issues! I can't understand why the nils hasnt caught on like it did in the states. It must be an availability thing, but then you couldnt find a marcum flasher up here when I bought mine. I had to go to New York State. Now Marcum is easy to source in Ontario, but nils is seldom to be found! Anyhow, having owned both, my vote is Nils if you can find one!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now