brickNblock Posted June 7, 2008 Report Posted June 7, 2008 Newangler, you've had a lot of greeat suggestions Bud. John said........ Get a hold of buddy who sold you the boat and get him to show you if theres a lil trick to starting it...generally is on older motors. and, Brian (misfish)...those older motors dont all have the kill switch and are difficult to get parts for"... If thats the case you really need to get a motor a little newer for sure. I just got rid of the motor off my tinny...it was an 18hp ev and talk about something that would turn you off fishing all together....a real pain to get started.......WELL< I love fishing...so i got myself a newer motor. JMO
glen Posted June 8, 2008 Report Posted June 8, 2008 Did you get it running? If not try this. Put motor in neural put throttle all the way forward open vent on top of gas cap prime bulb until hard turn key motor starts catch big fish post on OFC
idesign Posted June 8, 2008 Author Report Posted June 8, 2008 Did you get it running? If not try this. Put motor in neural put throttle all the way forward open vent on top of gas cap prime bulb until hard turn key motor starts catch big fish post on OFC thx buddy. the vent on top of cap is fixed.I asked my bro to try to open it but it doesn't.Also tried pliers&wrench to open it but it looks like it is fixed to cap.pls let me know.thx
glen Posted June 8, 2008 Report Posted June 8, 2008 I had a tank the same as that one. There is no vent screw on the top so just turn the gas cap back 1/4 turn. This will let the air in the top of the tank.
idesign Posted June 8, 2008 Author Report Posted June 8, 2008 I had a tank the same as that one. There is no vent screw on the top so just turn the gas cap back 1/4 turn. This will let the air in the top of the tank. k i will try that and will let you know tomorrow the results.thx for reply is there any way to test the motor without taking to lake.let me know.thx
danbouck Posted June 8, 2008 Report Posted June 8, 2008 (edited) k i will try that and will let you know tomorrow the results.thx for reply is there any way to test the motor without taking to lake.let me know.thx get some muffs and turn on the water or put it in a barrel Edited June 8, 2008 by Dan Bouck
ccmtcanada Posted June 8, 2008 Report Posted June 8, 2008 k i will try that and will let you know tomorrow the results.thx for reply is there any way to test the motor without taking to lake.let me know.thx Fill a big garbage can with water and put the lower end in it. Just be sure to make sure the water level goes higher than the water intake or you could ruin the lower end quickly. Make sure the motor is peeing when it starts.
idesign Posted June 8, 2008 Author Report Posted June 8, 2008 Thank you very much for all suggestion members gave me.I appreciated very much.My outboard finally started today and it is running great.Yesterday we didn't chocked the engine so it was not starting.Today my bro some how figure out how to chock and in first try the outboard started.I am very happy today.Once again thx to all who replied
oxcowboy Posted June 8, 2008 Report Posted June 8, 2008 GREAT, glad ya gotter going, hope ya catch lots fish. jason
misfish Posted June 8, 2008 Report Posted June 8, 2008 Thats great news. Enjoy. I am surprised that the screw thats in the pic,on the cap,does not turn.
Guest Johnny Bass Posted June 8, 2008 Report Posted June 8, 2008 I love happy endings and OFC is certainly a great community!!!!
idesign Posted June 8, 2008 Author Report Posted June 8, 2008 I love happy endings and OFC is certainly a great community!!!! Yep .It is thx guys
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now