Jump to content

Recommended Posts

Posted

Hey All:

 

I wanted to keep my boat going a little longer this year late in to december at the earliest.

 

Following Irishfields advice on making sure water does not expand in the pump, I have a plug at that end but I came across the problem with the livewell over flow.

 

It has a thru-hull connector with no threads or anything to attach too. This is well above the waterline, but if any water gets into it, the water will run down too the pump.

 

Has anyone sealed this with something, It needs to be temporary as I use the livewell in the summer :)

 

I was thinking tape but, with the water it would come off,

 

Thanks

 

LeXX

Posted

Dolt, I hope its not that easy,

 

I thought about that and looked in CDN Tire and BPO but could only find the ones that are too small,

 

Guess I will check a marine store for special order, checked on the internet and they do sell them that big enough :)

Posted (edited)

how about a cork? Or a bung from a barrel?

Another thought - perhaps a plastic bag with spray foam sprayed into it while it is in the hole.

Edited by hometownhandyman
Guest skeeter99
Posted (edited)

just leave it

 

my buddy has the same setup and we go out and when we pull fish out of the water they are freezing, never ever had a problem with the pumps!!!

 

 

it may happen, but honestly have never heard of it

 

if you are that worried about it, pour some antifreeze after you are done fishing in the livewell let it run down to the pump and you are good

Edited by skeeter99

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Topics

    Popular Topics

    Upcoming Events

    No upcoming events found

×
×
  • Create New...