bronze_back Posted February 28, 2010 Report Share Posted February 28, 2010 (edited) Anybody know a good place around Guelph to buy a hard tonneau cover and other accessories for a 2006 Ranger. I don't even know if a hard tonneau is the best option, but I'm looking for something to keep my rods and equipment locked up safe in the bed and be able to remove the cover without too much hassle. Edited February 28, 2010 by bronze_back Link to comment Share on other sites More sharing options...
steelhedrmatt Posted March 1, 2010 Report Share Posted March 1, 2010 Although this is not near Guelph, Talk to Chris at Barrie Auto Trim & Design. 705 739 7075. If you dont mind the travel, He can get everything for Ford rangers. Good prices too! Link to comment Share on other sites More sharing options...
SBCregal Posted March 1, 2010 Report Share Posted March 1, 2010 never used them, but there is a place called riva truck accessories in burlington Link to comment Share on other sites More sharing options...
Gerritt Posted March 1, 2010 Report Share Posted March 1, 2010 solid one piece tonneaus are a PIA to remove.. they are heavy and awkward..( being that they are wide..) and to reinstall them can be a pain.. if you dont have them square... I have one and curse it some days... G. Link to comment Share on other sites More sharing options...
BillM Posted March 1, 2010 Report Share Posted March 1, 2010 I could use one for the S10 as well.. Link to comment Share on other sites More sharing options...
Nanook Posted March 1, 2010 Report Share Posted March 1, 2010 You will be sorry if you get the hard cover. I had one, and as Gerritt said a PIA !! They look sharp, but are awkward to load or unload, particularly with larger items. I did'nt even TRY to get mine off or on. Your choice tho', good luck. Link to comment Share on other sites More sharing options...
Fish Farmer Posted March 1, 2010 Report Share Posted March 1, 2010 You can try Hawk Caps, They make them right there at there factory. Near Brantford That's were I bought my cap, cheapest place I found. Give them a call. hawkcaps.com Link to comment Share on other sites More sharing options...
Gerritt Posted March 1, 2010 Report Share Posted March 1, 2010 I have a nighthawk cap on my truck... They are not light.. and if you do not have the rails perfect... good luck closing it.. But as FishFarmer pointed out.. they are cheaper... Thanks for the link F.F. I need to order new "shocks?" for my lid. G Link to comment Share on other sites More sharing options...
bronze_back Posted March 1, 2010 Author Report Share Posted March 1, 2010 Thanks for input guys. I'm looking at a 4 panel lockable hard cover right now. They want $1200 for it. Ouch, didn't know they were that expensive, but it seems more convenient than the fiberglass 1 piece cover that they want a $100 more for. Link to comment Share on other sites More sharing options...
Fish Farmer Posted March 2, 2010 Report Share Posted March 2, 2010 I had a Aluminum 4 panel Fold a Cover, they leak at the hinges when the rubber cracks. Not good Plus my locks would fill with water and freeze. Peace of junk. They had lots of them in the scrap box at Hawk caps. The guy was going to throw mine in the scrap. I told him I wanted to sell it, he said good luck. Link to comment Share on other sites More sharing options...
Mattones Posted March 2, 2010 Report Share Posted March 2, 2010 (edited) Does your truck have a locking tailgate? I own a Lowpro Truxedo on my 09 Ram 1500. Its nice and simple to install no drilling although its a soft cover but the fabric is tough and if someone wants in they have to knife the entire thing as its almost impossible to tear by hand. Great in cold and warm weather aswell. National 4WD 4X4 Offroad www.national4wd.com 5379 Harvester Road Burlington There is another place in Burlington where I bought my cover but they moved and i forget the name of it. Edited March 2, 2010 by Mattones Link to comment Share on other sites More sharing options...
ch312 Posted March 2, 2010 Report Share Posted March 2, 2010 hard covers are only good for those who use their truck like a car. as mentioned, its a PITA taking them off every so often when you actually want to use the bed. soft FOLDING covers are the way to go. dont even think about getting a soft cover that uses snaps or velcro around the perimeter if its the typical vinyl material. hard cover or soft...if a thief wants in there neither one will stop them. Link to comment Share on other sites More sharing options...
getnjiggywithit Posted March 3, 2010 Report Share Posted March 3, 2010 (edited) I had the same issues with the hard covers. This is what I use! It's a soft top but folds in 3 comes on and off in less than a minute and No hardware!!! Best of all it only cost me like $400 and installed it myself in the parking lot in less than 2mins! http://extang.com/docs/trifecta.html I should also add that it is totally waterproof ! Edited March 3, 2010 by getnjiggywithit Link to comment Share on other sites More sharing options...
bridge Posted March 3, 2010 Report Share Posted March 3, 2010 I got a 4 panel hard cover for my Ranger and it cost about 1000 as well. I got it through the auto parts source or what ever that store is called. As mentioned above though dose your tailgate lock because the panel locks up but all you have to do is open the tailgate and theres your stuff. Also what kind of gear do you have because if you have one piece rods they won't fit in the back anyways. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now