misfish

No, I put my guests in it and lock it up.LOL

First I have seen that look REAL LIFE.

The jug is so you can drown yer sorrows.

I believe I know someone that has a GPS that will do.Hey buddy Terry. Lab top I will do without.I,ll be stopping every 5 minutes to see whats up on OFC.I,ll never get there.LOL

Maybe he just wanted to cool off. Terry you can bend 1/8 very easy.The fold over edge for hanging may have to be rivited as well If you can have a brake operator do it for you,even better.Also heat up the material,makes for bending easier.IMO If you can work with the stuff and feel confident in it,sure go for it. It may become heavier then you think though,IMO.

Since I have access to welding aluminum I would weld it,but good quality silicon and rivits qould serve the purpose well. Wayne what ya think? 1/8-3/16 should be plenty good for thickness.

Hope this helps Nelson You can put a drain in the well,attach a hose to it,that can go to the back of the boat.Just pull the plug both in the well and the boat to empty.Or you can spend money and buy pumps.

Nice fish Sam.

Yeah,2 PFD,s.

Live well made from aluminum Dont let the small looking opening fool you,the well is the size of the intire seat.

My wife said pull that post .LOL I got a few pic,s from Daytoin a body sent me. I,ll have to post later as thier on my home pc. Hey Dawg,I,ll be bring down the good stuff (made in CANADA).I,ll even be offering it around.That should put the rowdy one to sleep pretty fast.HAHAHA

Lots of great info.I have even hooked up on a site that is Canadian run and lots of great info there as well.Real helpful people. Thanks again. Bassboy,I will only charge you the cost of fuel to get there and back.

Heres my 2 cents on your project. I would run the platform from the middle seat to the front.Not going any higher then the seat level.Alos,I would make the front one a storage area and the one in the middle a live well.Now with that done,I would design a storage box along one side.Making it flush with the top of the boat.Rod storage.You could also make storage box between the middle and front seat. Between the back and middle seat I would have the floor sitting on the ribs. with a support stringer running up the middle. REMEMBER,DO NOT USE PRESSURE TREATED WOOD.IT IS NOT ALUMINUM FRIENDLY.I would suggest using just plain spruce and painting it with an oil base exterior paint. For your bow mount I did this. Looking forward to your finished project.

Glad yer visit to Barrie was enjoyable and succesful. I drove by in the morning ,and yep those docks looked slippery and very crowded. I like to throw the furry little guys a perch or two. Thanks for sharing.

Besides all that Fisherman,did you fish the docks today?Looked for ya,but then again,we all look the same down there.HAHAHA

GUILTY

A worthy investment is the 1.5 amp trickle auto charger that wal-mart sells,thirty five bucks.It,s the little black box one.On board charger.Leave it on all winter long.Wont hurt the battery and will keep it at it,s top charged level. Oh that wood thing is a myth.

Next to Bills,I like the Green Machine.LOL

Ger,that would make a great place to have a G2G. I have been on Little lake here in Barrie,Dec.4th.Shallow lake.

Ger,if you come up here,I,ll share my whites and lakers with you next May.

Nice fish Steve. My boy was out today,landed 1 nice eater for his efforts.

GREEN MACHINE,GREEN MACHINE.

I see it,it,s right there,,,,,,,,,,,,,,,,,,,,no not there,there,,,,,,,,,,,,,,LOL Just fool,n. No idea.

No ice here Norm.

I stopped by for a look see this AM.Fishing was slow from the reports and from what I saw. I did bump into Mark Kulic and Spike from extream,they were just heading out for some smallies.The bay was like glass.