-
Posts
2,235 -
Joined
-
Last visited
-
Days Won
53
Content Type
Events
Profiles
Forums
Store
Everything posted by DanD
-
Wait. You originally said that the replacement bearings had to be hammered/forced on? If so that tells me that the spindle’s damage has knurled it. In other words increased its diameter. By polishing it, it will bring it back to its original size. Dan.
-
If you have the time and patience, you still might be able to save the axle. Start by cleaning all of the grease off the damaged area with some solvent. Now with some 60 grit emery cloth (1 - 1 1.2" wide) about a 1' long length and start polishing the damaged area. After the 60 grit has done its job, move up to 120 and then finish off with 320 grit. Keeping the polishing even around the diameter of the spindle. When you're done the bearing should slide on the spindle easily and the inner race (the part that touches the spindle) of the bearing should be able to rotate easily when held and turned by hand. Don't over polish; stop when the bearing will just slides on. The inner race of the bearing needs to be able to rotate ever so slightly; by the friction of the rollers running over it. If it cannot you will have bearing failure again; due to the load weight will always be on that one part of the bearing race. Lay the cloth over the spindle; take one end of the cloth in each hand and start pulling the cloth back and forth, over the damaged area; something like how a shoeshine person would buff your shoes with a cloth. I've salvaged a lot of axles over the years here at the garage, by doing this. To the point I bought a handheld 1" wide air belt sander; speeds the job up. LOL Dan.
-
as a friend would say.. nice visit to the grocery store.
DanD replied to Freshtrax's topic in General Discussion
Angler with sport license 6 walleye in your possession. Commercial fisher with nets full on a daily routine, until quota is met and that's only if they're not doctoring their books. Sorry man; but who's doing the damage to the fishery? Dan. -
Just back from our annual trip up to Elk Lake (Montreal River); stayed at Elk Lake Wilderness Resort. Rented a cabin and decently equipped Lund; that was always topped up with fuel, as soon as we got back to camp. This was out 6th trip there. The fishing was a bit tougher this year; walleye were scattered at all different depths. What we found was that anything making below 20' would not hit on anything we offered? So we mostly fished in the 12-18 FOW. We definitely had to work for them. Bottom bouncing with a drop shot rig and making sure the minnow on your hook was alive and kicking. For some reason no one in the town of Elk lake sells minnows? So I made a bait tank out of a 7cu' chess freezer; That I installed an adjustable thermostat to keep the water at appox 50° and put a pond bubbler in it. Bought 15 dozen minnows from a place around Latchford (Still the Montreal River). At the end of the week there were still approx 3 dozen left, all still very much alive. Gave them away for others to use at the camp. Pike fishing was about normal for the area; find a weed patch and start casting a spoon or spinner bait and it wouldn't be long before you had one on. No giants but good table fair sized of nice tasty beer battered pike. After the fish fry, we became a little more picky on what we kept size wise for both the walleye and pike. We released a lot of fish that were under 12" for the walleye and 18" for the pike. After having our limits of these, we started focusing on bass and perch. The perch in that area are usually wormy at this time of year; but they all seemed to be free of them? The bass for some reason had a real funky smell to them? So they were all catch and release. Had a good time and we're booked again for next year. Sorry no pics; but everyone here as seen average sized pike and walleye. Dan.
-
What I meant was that I agree with you that you were treated very well. It was the comments of the guy (@ dealership) be fired for telling you what Ford’s policy was on the oil consumption. Sorry for the confusion on my part. Dan.
-
That’s The mother ship (Ford headquarters) making those policies. In other words don’t shoot the messenger. It be like trying to get a mechanic to feel sorry for you when he tells you what it’s going to cost to fix your vehicle. As a mechanic; I didn’t design, build, buy or break the thing. I’m just here to fix it. Dan.
-
A good friend of mine fished it once. After the lake ate his boat's prop and took a bite out of the skag; he swore to never return. LOL So i guess the lake got its name for a reason?? Dan.
-
X2 I might be naive here; but even a great forum like this, it still needs new people to join and feel welcome. Now if this or whoever new member doesn't contribute in other ways; I'll get the coals for the dog's roast. Dan.
-
Well at least the manufacturer has circled the problem. LOL Dan.
-
Lew I like your philosophy! Good on you to be able to shrug off a pain in the ass and like you said MOVE ON. Dan. Oh Yeah nice truck. LOL
-
Good thread guys; lots of great info. On my first fly in, I wasn't sure what to bring tackle wise. We were also weight restricted for the flight. I ended up buying a couple of roll ups for my spoons and body baits. My tackle boxes weighed as much if not more then the tackle. That allowed me more choices of what to bring with me and still be within weight limits. It also helped that the camp owner allowed me to have my beverages of choice flown in prior to my flight; when they had a light load. Who would have thought a bottle or two of rye, weighed that much? LOL Dan.
-
Very well said! Makes me a little more understanding for the want to ride. Maybe a death wish; but if he is riding a bike with ape hangers, he likely was patched and had the attitude that you'll move. How do patched riders get away with bikes so loud that it drowns out the kids with the big subs in their trunks? I chirp a tire with my truck and get pulled over for unnecessary noise? LOL Dan.
-
I haven't personally dealt with them for repairs; but I know people who have and they didn't have anything bad to say? I've purchased parts there in the past and they were every helpful getting the stuff I needed. They're only like 10 minutes away from my shop. Dan.
-
I use to work on bikes at my shop, when I was younger. I'm actually still licensed to do safety inspections on bikes; but I do not touch street bikes anymore. Seen way to many people hurt or killed on them; that I no longer want to be apart of someone I helped get into an early grave. Here's one example of why. There was a whole family that were/are customers. The Grandson bought a bike and brought it to me to safety it. I refused to and the kid left mad as hell. Granddad called me and said that after all these years of us dealing together; they were done with me. A month or so later, I see the grandson pulling into my lot. I could see the bike's fairing is all scraped up with large cracks all over it. He gets off the bike and walks towards me; saying he laid the bike down and could I help him. As he turned to walk back to the bike; all I could see was a shredded, blood soaked T shirt. I told him to get into my truck and took him to emergency. They spent close to 4 hours sanding and picking gravel out of his back. Granddad showed up at the shop the next day and apologize to me and said he now understood why. This kid was lucky but I have so many more things I could tell you of what had happened to others that weren't. Before anyone brings this up; yes people can get hurt while driving their cars. At least they're in a crash shield and with 99% of today's vehicles having air bags; the chances of being badly hurt or killed are much much lower then riding with the wind in your hair. Dan.
-
Now why would I take veggies like these and try and make them taste like a sausage? This is my first attempt at hydroponics and it has been fun watching my stuff grow. No weeding, cultivating and the growth rate is amazing. Want a salad, to go with that steak? Go out and pick enough romaine or lettuce leaves that you need for a meal. Next week there will be more growing in. Starting on our second round of strawberries; all the blossoms are back. Dan.
-
I eat plant based food all the time. Cow, sheep, deer, moose, pig, rabbit, chicken and fish; they all eat plants, plant seed or plankton and I eat them. I don't see what the issue is? LOL So take those veggie burgers and feed them to the animals and when large enough harvest the animal. Dan.
-
Just order one off of amazon. Hope it gets here before my trip up North? Dan.
-
video:Drunk boater rams another boat on Lake St. Clair
DanD replied to woodenboater's topic in General Discussion
I agree with there's no excuse; but I'd also would like to know what the "innocent" boater did? When I had my 16' tinny, I cannot count the number of times that I've been cut off, all but capsized or damn near run over; by these innocent cabin cruiser drivers/owners. Something set that drunk off; but again he shouldn't have done what he did. Dan -
Couple of vids that may help? Dan.
-
I'd go back in a heart beat; if I had that kind of money sitting around.
-
Just back from my BC trip and all I can say is amazing!!!!!! I cannot find one thing that I could complain about with Duncanby Lodge. The fishing again was amazing, I have no idea of how many chinook that I caught; I lost count? Anything under 10lbs we released; along with anything above 30lbs (Called a Tyee) due to their genetics of being that big. I was lucky enough to be on a boat where one of the guys landed a Tyee at 32lbs We were able to release it after about 10 minutes of hard work for it to swim away strong. The lodge owner and guides were very pro catch and release of these large fish. To make it even more appealing they offer up a hand carved center pin reel to anyone that releases a Tyee. My largest fish was 20lbs and all fight; it and the others came out of the water 5 or 6 times trying to shake the hook. Being barb less hooks just added to the fight. I have never fished with a center pin before; so it was also a bit of a challenge; but now I'm looking to buy one. We also fished for ling cod and rock fish (sorry no pics) . I was reeling in about a 3 lb rock fish and a ling cod grabbed it and had my fish half way down its throat by the time I landed them both. Here is one of the 20lbers that I caught. If anyone here ever is offered a trip to fish the West coast of BC; do not hesitate to go. Just amazing fishing. Dan.
-
I'd be happy with just one to take home; but wouldn't mind practicing catch & release after that. LOL Nice haul for your niece and company! Thanks for posting the pic HH. Dan.
-
I leave tomorrow on this trip; longest month of my life waiting. Why I brought this thread back up; is that I'm looking for any tips on halibut fishing. Watched a bunch of videos and read a ton of articles on fishing for them; but would like to hear from anyone's first hand experiences? I've done a lot of down rigging, here on Lake Erie. So the salmon fishing won't be as much a mystery to me; as what bottom bouncing for halibut is going to be. Dan.
-
How bad am I going to get spammed after giving them my email addy? LOL Votes In. Dan.
-
Season or limit for White Bass in southern Ontario?
DanD replied to KawarthaAngler's topic in General Discussion
Went on a walleye charter to the Detroit river; a week ago last Wednesday. Caught a pile of what I've always called white/silver bass; but the charter guy was calling them white perch? Who am I to argue; plus I was on my way to get a limit of walleye.? Dan.