dheitzner Posted December 1, 2006 Report Posted December 1, 2006 hey everyone, so i'm trying to do some maintenance on my baitcasters now that bass season is done, and i've started with my pflueger president. the trouble that i'm having is i can't get the handle off. i realize that on my other baitcasters there is a thing in the center of the handle with a screw that allows the handle to be removed and then the drag can be backed off and the gears exposed. on my president there appears to be no way to do this. does anyone have any experience with these reels?
Jigatollah Posted December 1, 2006 Report Posted December 1, 2006 I'm using the Presidents and Supreme reels from Pflueger and have found the same thing. I couldn't get the side cover off. If there is a problem with the reel, I would take it to warranted service centre and let them play with it. If you break something, it will cost ya.I f they break it, they fix it.
Kerry Posted December 2, 2006 Report Posted December 2, 2006 Did you get a parts description sheet with your reel?If not try their website and see if they have a parts list diagram that you can download.Most companies do now. Kerry
ecmilley Posted December 2, 2006 Report Posted December 2, 2006 from what i have been told the plueguer and bps reels are not servicable, if there a problem you throw it away and get a new one
dheitzner Posted December 2, 2006 Author Report Posted December 2, 2006 thanks for the responses everyone, that is what i was thinking ecmilley, just wanted someone to confirm it. i'll keep that in mind when replacing it that's for sure thanks again, darcy
Jigatollah Posted December 2, 2006 Report Posted December 2, 2006 from what i have been told the plueguer and bps reels are not servicable, if there a problem you throw it away and get a new one The reels are serviceable. I have spoken directly with a Pflueger rep in the US . It's probably best then to have a dealer repair or clean them out.
EE_ Posted December 2, 2006 Report Posted December 2, 2006 http://www.pfluegerfishing.com/how/gen-manuals.html
setomonkey Posted December 2, 2006 Report Posted December 2, 2006 I'm always impressed when I hear about somebody who's willing to break down their reels, given how many parts there are (at least from the manuals that came with my reels). I'm the kinda guy who will always end up with an "extra" piece at the end of it -- which is why I take my reels to a pro. Mike
mattyk Posted December 3, 2006 Report Posted December 3, 2006 I always have the same problem. When i put it back together, i have several extra pieces left.
2jack2 Posted December 3, 2006 Report Posted December 3, 2006 Do you live close to BPS? is so, drop in and I will show you how to do it.
BabyHerc Posted December 3, 2006 Report Posted December 3, 2006 First, hold the reel in your left hand like you're gonna make a cast. Then, reach a finger or two across the bottom, across the reel foot, and hold the drag star in place. With your open hand, reel backwards on the handle. The handle will now unscrew from the shaft. Remove remaining parts as necessary. If you still can't get it, drop in to BPS, and I will show ya if 2jack2 doesn't first. 2jack2, do I know you?
dheitzner Posted December 3, 2006 Author Report Posted December 3, 2006 hey fellas, thanks for all of the replies - i FINALLY got it!!! reel is gonna be runnin' smooooooth for the opener next year!
NBR Posted December 3, 2006 Report Posted December 3, 2006 Remove the handle as follows: Tighten the star drag as far as possible. Hold the star drag towards the reel body. Unscrew the reel handle. This is a bit cumbersome but it does the job. I service mine every year.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now