Dustinnn Posted July 4, 2007 Report Posted July 4, 2007 Hey all, I'm a virgin post'er, but love this forum. Anyways, I got up to the cottage friday afternoon, put the trolling motor on the boat, went to go out fishing, decided I'd give it a try before I left the dock, and sure enough the thing wouldn't turn. Battery was tested and was fine. You can hear a little buzz but the props won't even turn. Does anyone know where to get a trolling motor serviced. It's an old Minn Kota, is it even worth getting fixed? I don't want to spend a ton of cash. Bad way to start a day of fishing, but still managed to catch a few smallies.
Jen Posted July 4, 2007 Report Posted July 4, 2007 If it is Old why not look up HOW TO FIX A TROLLING MOTOR online and try taking it apart yourself. Afterall how difficult can it be?? This is the approach I sometimes take, although in saying that I will have to admit to purchasing a thing or two afterwards, mostly it works out in the end and I learn something in the process. http://www.outboardrepairs.com/minn_kota/ http://www.outboardrepairs.com/topics/005616.html Just a thought... Cheers, Jen P.S Welcome to OFC
ccmtcanada Posted July 4, 2007 Report Posted July 4, 2007 I'm not sure about where to get it fixed, but if you let us know where you are located, someone may know of a place close by. Welcome to the forum! Nice smallie!
charlesn Posted July 4, 2007 Report Posted July 4, 2007 I think Rocky's in Orillia is the place most go to for TM service. Depending on how old it is and the thrust, it might make more sense to upgrade. Good luck, Charles
Dustinnn Posted July 4, 2007 Author Report Posted July 4, 2007 I'm from the Newmarket area, but work in Toronto. So I can go pretty much anywhere to get this thing fixed. I did take it apart on the weekend expecting it to be dirty and corroded but to my suprise it was really clean, so I'm still lost.
lew Posted July 4, 2007 Report Posted July 4, 2007 Aikmens at Dixie & Dundas in Missisaugua is an authorized Minn Kota repair facility 905-277-3595
huey graphite Posted July 4, 2007 Report Posted July 4, 2007 If it is Old why not look up HOW TO FIX A TROLLING MOTOR online and try taking it apart yourself. Afterall how difficult can it be?? This is the approach I sometimes take, although in saying that I will have to admit to purchasing a thing or two afterwards, mostly it works out in the end and I learn something in the process. http://www.outboardrepairs.com/minn_kota/ http://www.outboardrepairs.com/topics/005616.html Just a thought... Cheers, Jen P.S Welcome to OFC Good for you Jen. If you use caution it can be a money saver and a great learning experience. Sometimes however you can cause more harm than good. I learned that from attempting auto repair. I have to be selective in what I attempt and what I leave to the experts. Dustinnnnnnnn, If you have a voltmeter and can access the motor, check at the two wires where they enter the motor for DC voltage. At maximum speed you should have approx. 12V DC. If you are getting voltage, it's safe to assume the problem is with the motor and probably not worth repairing. If you are not getting voltage than the problem is in your controls. If you can, trace back to where you are getting voltage. In most cases the control module is encased in silicone or epoxy. PM me if you decide to troubleshoot it.
Dustinnn Posted July 4, 2007 Author Report Posted July 4, 2007 Thanks for the quick replies. I'm going to take it apart again tonight, and test it with the voltmeter. We'll see how it goes from there. thanks again for the posts!
Jen Posted July 4, 2007 Report Posted July 4, 2007 Good for you Jen. If you use caution it can be a money saver and a great learning experience. Sometimes however you can cause more harm than good. I learned that from attempting auto repair. I have to be selective in what I attempt and what I leave to the experts. Dustinnnnnnnn, If you have a voltmeter and can access the motor, check at the two wires where they enter the motor for DC voltage. At maximum speed you should have approx. 12V DC. If you are getting voltage, it's safe to assume the problem is with the motor and probably not worth repairing. If you are not getting voltage than the problem is in your controls. If you can, trace back to where you are getting voltage. In most cases the control module is encased in silicone or epoxy. PM me if you decide to troubleshoot it. It really isn't about saving... more about learning... Caution is always used, so is the digital camera to take pictures of the dis assembly along the way... this makes assembly much easier when you just can not recall where this or that went. Good luck with the repairs... let us know how it works out! Cheers, Jen
Roy Posted July 4, 2007 Report Posted July 4, 2007 The first thing to do is to take the prop off and take all the fishing line out of there. You'll find that it turns well after that.
Dustinnn Posted July 4, 2007 Author Report Posted July 4, 2007 hahaha Roy, That may have been the case if it wasn't the first time this year I tried to use it!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now