Raf Posted June 27, 2014 Report Posted June 27, 2014 Hi guys, I found this one hanging not connected to anything. Can anyone point me to where it should connect to? it's right by the oil dipstick on a yamaha 40hp 4-stroke
davey buoy Posted June 27, 2014 Report Posted June 27, 2014 Breather hose?You can't find any where within that length to where it may go?
Raf Posted June 27, 2014 Author Report Posted June 27, 2014 no i cannot unless it is underneath / behind the manifold?? directly above?
aplumma Posted June 28, 2014 Report Posted June 28, 2014 Open the brass screw 1/2 turn it should let fuel flow out if it is what I think it is. If it does it is the bleed down for the carb. If no fuel then re close the screw 1/2 turn and I have guessed wrong. Art
Raf Posted June 28, 2014 Author Report Posted June 28, 2014 Art this is a fuel inject motor. Tho that doesnt mean you are wrong. If I do turn it and fuel comes out what do I do with it
Raf Posted June 28, 2014 Author Report Posted June 28, 2014 (edited) well, I will feel silly (but relieved) if that's what it is. i'll give the screw a quick turn tomorrow and if i get fuel coming out i guess it is safe to assume it's the drain Edited June 28, 2014 by Raf
TennesseeGuy Posted June 28, 2014 Report Posted June 28, 2014 Possibly in place to drain ethanol gas before it does more harm.
aplumma Posted June 28, 2014 Report Posted June 28, 2014 Yes it also applies to fuel Injected motors I am used to working on the carb. engines because it is what I own. Same principle though. Art
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now