ohhenrygsr Posted October 5, 2011 Report Posted October 5, 2011 Hey Guys, I was just wodering if you could give me some insight on what i'm doing wrong. My friend brought me his HDS-5 to install and the transducer plug won't fit in the sonar plug-in. The tag on the transducer cable is HST-WSBL. Do I have the correct plug?
BillM Posted October 5, 2011 Report Posted October 5, 2011 (edited) Henry those pins are spaced way bigger then the female side of the plug. No way that's going to fit (Unless it's going to be a really snug fit) Did they give you the wrong transducer? Edited October 5, 2011 by BillM
ohhenrygsr Posted October 5, 2011 Author Report Posted October 5, 2011 I think that's what i'm going to narrow it down to.
BillM Posted October 5, 2011 Report Posted October 5, 2011 I just checked the Lowrance site and that transducer is compatible with the HDS units.
mercman Posted October 5, 2011 Report Posted October 5, 2011 Could be the right part number, but the wrong part in the package.I see that alot in my bussiness.
ohhenrygsr Posted October 5, 2011 Author Report Posted October 5, 2011 Yes, I think it might be meant for the older Lowrance units. Maybe LMS and such
Nipfisher Posted October 6, 2011 Report Posted October 6, 2011 Just checked out my bullet transducer from my PPP-1 (portable unit for HDS) and it only has 3 pins in a semi-circle. Can't see the one on my boat now but gonna guess it is the same.
scugpg Posted October 6, 2011 Report Posted October 6, 2011 That model is the right transducer. Lowrance recently switched them to 5 pin instead of 7. There should be a notch in the spot it connects
scugpg Posted October 6, 2011 Report Posted October 6, 2011 The connectors gray part lies wide part horizontal try both sides one should fit
Ron Posted October 7, 2011 Report Posted October 7, 2011 (edited) To me, it looks like you are trying to put the power up wire into your transducer plug in. Last I recall, there is not 3 wires coming from the transducer. However, there is 3 wires coming from the power cord and the power cord hooks up on the opposite side of the HDS 5 Edited October 7, 2011 by Ron
ohhenrygsr Posted October 7, 2011 Author Report Posted October 7, 2011 Well the owner failed to tell me that the plastic insert came off the transducer side. He put it back together in the WRONG ORDER This is the first time i've seen this happen. So i took the insert out and flipped it around. WOW it fits now LOL. Thanks for all your help
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now