bassfighter Posted October 26, 2010 Report Share Posted October 26, 2010 (edited) Check this site for brand name comparison test. http://tackletour.com/reviewfluorocarbontest.html Report was done in 2007 Edited October 28, 2010 by bassfighter Link to comment Share on other sites More sharing options...
PikeMolester Posted October 26, 2010 Report Share Posted October 26, 2010 (edited) Thank you! I haven't been able to choose any fluoro over any other all season. Edited October 26, 2010 by Canucker Link to comment Share on other sites More sharing options...
singingdog Posted October 27, 2010 Report Share Posted October 27, 2010 The article is a bit old, but informative. It helped me make up my mind to not use flouro based on 1: the incredibly low knot strength across all brands 2. the underwater photos showing that Stren mono is as "invisible" as flouro 3. that flouro is not a "no stretch" line. Link to comment Share on other sites More sharing options...
Gregoire Posted October 27, 2010 Report Share Posted October 27, 2010 I use fluoro leaders and will continue to do so based on the info in this article, paticularly the abrasion resistance when exposed to water. However I would never use a fluoro main line based on the info in this article. I just don't see a difference between fluoro and mono. Link to comment Share on other sites More sharing options...
canadadude Posted October 27, 2010 Report Share Posted October 27, 2010 The abrasion resistance is the most important factor for me especially fishing in zebra muscle waters Link to comment Share on other sites More sharing options...
MCTFisher9120 Posted October 27, 2010 Report Share Posted October 27, 2010 so is Seguar #1?? Link to comment Share on other sites More sharing options...
Garry2Rs Posted October 27, 2010 Report Share Posted October 27, 2010 As Singing dog noted this information is from 2007. If we believe the line companies claims of annually "new and improved" products, perhaps this data is completely out of date. I thought the tests were a little vague too... What is the relationship between how a human eye sees a given line underwater and how a fish sees or doesn't see it? How is knot strength affected by soaking the line? If the outer layer softens when soaked, do the knots hold better? If the outer layer softens does abrasion resistance decrease? If you are casting and retrieving a crankbait etc, does the speed of the line through the air essentially dry the line at the beginning of each cast? Is Fluorocarbon totally overrated? If it's only real attributes are slightly lower visibility and it sinks, is it worth the much higher cost? I use braid, with a leader. Since Seaguar invented Fluorocarbon and offers special leader formulations, that is what I'm going to use. One interesting thing to think about...The best Bass fisherman in the world, Kevin Van Dam, has won 4.9 million dollars and numerous titles fishing with relatively cheap BPS Fluorocarbon. Garry2R's Link to comment Share on other sites More sharing options...
PikeMolester Posted October 27, 2010 Report Share Posted October 27, 2010 ya im sticking to light braid and fluoro leaders...I don't care about the tying... I hate fluoro Link to comment Share on other sites More sharing options...
perchslayer666 Posted October 27, 2010 Report Share Posted October 27, 2010 Despite all the various brands out there for leader material, the best flouro I have found is either P-Line Halo or Trilene Professional grade. I exclusively use the Trilene pro grade for leaders when float fishing for Steelies, very strong, abrasion resistant and inexpensive. I don't bother with IGFA rated Flouro lines - too weak and usually more expensive. As for the pinnicle of Flouro lines out there I wouldn't mind giving that Diawa Toray line a try ($40 for 250 yds) Link to comment Share on other sites More sharing options...
fish_fishburn Posted October 27, 2010 Report Share Posted October 27, 2010 I have always thought floro line was just a gimmick. Then I started to try different products and have come to the conclussion that they pretty much are more gimmick than performance. But then again, I rarely fish gin clear water. Link to comment Share on other sites More sharing options...
canadadude Posted October 27, 2010 Report Share Posted October 27, 2010 Bass Pro shop XLT is my pick and I use it for Leaders, it's the best I've found,I havn't bought into the expensive segaur leader material,$10+ for 30m is alittle rich when I'm using 8'+ leaders for Steelhead. The BPS Fluro is the best for abrasion resitance and thats what I'm after. Link to comment Share on other sites More sharing options...
bassfighter Posted October 28, 2010 Author Report Share Posted October 28, 2010 (edited) Anyone tried Visious brand Fluro line? I read mix review on it due to potential breakage. Cheapest in the market. I want to use the fluro as a leader on braid especially on dropshotting or steelheading. I am contented either using full mono or full braid on my reel for bass fishing. Edited October 28, 2010 by bassfighter Link to comment Share on other sites More sharing options...
Bernie66 Posted October 28, 2010 Report Share Posted October 28, 2010 I agree with canadadude. BPS fluoro IS the cheapest (if you get it on sale) with one of the best overall rating in that tackletour survey. I've tried 6lbs to 14lbs as leaders with braided mainline in the last few years and have been very happy. No breakoffs yet. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now