Garry2Rs Posted October 11, 2010 Report Share Posted October 11, 2010 This is quite new. It seems to be a lot like heat shrink tubing, but uses a glue to bond mono or fluorocarbon to each other or to braid WITHOUT A KNOT! It might not be available in North America yet, but I have heard that it is. Check this out! The idea is simple enough. To attach a hook or lure to your line: 1. Slide a tube onto the end of your line. 2. Add the lure or hook and tuck the tag end back through the tube. 3. Put a couple of drops of glue onto the joint and position the tube over the joint and squeeze the joint gently. To joint two lines, slip a tube onto line #1, then push line #2 through the tube from the opposite end. Glue and position the tube over the joint. Assuming that the tube tightens up when it hits the glue, this might solve a lot of problems for guys that want to use long leaders that they can wind passed the tip guide, or guys using heavy lines where the knots can be quite bulky. Just like the 60's...Better living through Chemistry...grin. Garry2R's Link to comment Share on other sites More sharing options...
cheaptackle Posted October 11, 2010 Report Share Posted October 11, 2010 This sure could put an end to the "which knot to use" discussions Garry. Now I gotta see where it can be found to try it.... Michael Link to comment Share on other sites More sharing options...
Dozer Posted October 11, 2010 Report Share Posted October 11, 2010 ... which glue to use? haha Pretty cool! Link to comment Share on other sites More sharing options...
EC1 Posted October 11, 2010 Report Share Posted October 11, 2010 Seems pretty cool for those that are inadequate at tying knots As of today, it seems that I'll stick with my albright because it's not bothering me yet. Come tomorrow, I think I might try it out. Lol. Link to comment Share on other sites More sharing options...
smally21 Posted October 11, 2010 Report Share Posted October 11, 2010 this would be a great tool for guys who may know their knots but have other problems with tying them, poor eyesight, fingers in table saw, etc. Or in my case a combination of severe tendonitis, and nerve damage that makes fiddling with such small lines difficult. followup if you find it - would be a lifesaver! Link to comment Share on other sites More sharing options...
cheaptackle Posted October 11, 2010 Report Share Posted October 11, 2010 Finally took a moment to google it (can't do much else on a holiday). The only North American result was fishermanswarehouse.com in California. 19.99 u.s. per kit. There was a whole wack of Italian sites along with the Australian, be interesting to see when it becomes a stock item here. Michael Link to comment Share on other sites More sharing options...
Garry2Rs Posted October 11, 2010 Author Report Share Posted October 11, 2010 I will order a kit in a couple of weeks, once I am set-up again down south. Fisherman's Warehouse has several locations in California. There are several sizes of tubing offered. It is unclear, in their advertising, if the glue causes the tubing to shrink tightly to the line or not. Providing that a tight fit is possible, I see this as potentially a great product for use with heavy leader material. With Fluoro and Mono over twenty pound test the strongest knots get bulkier and bulkier until they're impossible to tie properly. Garry2rs Link to comment Share on other sites More sharing options...
cheaptackle Posted October 12, 2010 Report Share Posted October 12, 2010 I'll also check with my wholesalers to see if they have any plans for it. I was wondering myself about the tube shrinking - seems it would be best if it would. You'll probably get your hands on it before I can, Garry. Looking forward to hearing about it! Michael Link to comment Share on other sites More sharing options...
solopaddler Posted October 12, 2010 Report Share Posted October 12, 2010 (edited) I'll bet you could do this yourself with heat shrink tubing and crazy glue. Edited October 12, 2010 by solopaddler Link to comment Share on other sites More sharing options...
cheaptackle Posted October 12, 2010 Report Share Posted October 12, 2010 I have to admit wondering about it myself solopaddler. Something to try for sure. Just wondering about properties of the p-line adhesive vs the super glue's, flexibility of the tube etc. I might just try it one winter's day when I'm bored, unless you beat us all to it! Michael Link to comment Share on other sites More sharing options...
Vanselena Posted October 12, 2010 Report Share Posted October 12, 2010 I'll bet you could do this yourself with heat shrink tubing and crazy glue. If the line is being welded then it would be interesting to see how much line strength is lost. The tube is likely there to provide another point of contact for the glue which would increase the overall adhering of the glue. Link to comment Share on other sites More sharing options...
hirk Posted October 12, 2010 Report Share Posted October 12, 2010 (edited) I just got it in the store,if anyone is close and pops in mention it and we can try it.I have not yet. Edited October 12, 2010 by hirk Link to comment Share on other sites More sharing options...
Roy Posted October 12, 2010 Report Share Posted October 12, 2010 I just got it in the store,if anyone is close and pops in mention it and we can try it.I have not yet. Trust Hirk's to get what you need when you want it. Link to comment Share on other sites More sharing options...
hirk Posted October 12, 2010 Report Share Posted October 12, 2010 Thanks Roy,I just have a sample kit (none for sale at the moment)but it looks interesting and if it checks out I'll load up. Link to comment Share on other sites More sharing options...
cwpowell Posted October 12, 2010 Report Share Posted October 12, 2010 Thanks Roy,I just have a sample kit (none for sale at the moment)but it looks interesting and if it checks out I'll load up. where is your store Link to comment Share on other sites More sharing options...
hirk Posted October 13, 2010 Report Share Posted October 13, 2010 Well I played with it and seems to be fast enough and makes a strong bond with fluoro-fluoro or fluoro-mono,mono-mono.As far as braid you need to tie a twist knot 1st before you can join it or it will slip so not so fast,may as well tie a uni knot etc..Seems to be a good idea if your bad at tying joining knots. Link to comment Share on other sites More sharing options...
cheaptackle Posted October 13, 2010 Report Share Posted October 13, 2010 How does it look for the final assembly to pass through a rod's guides? Is it smooth enough to not pick up weeds? One of my biggest peeves is the algae blooms here on Lake St. John accumulating on my braid to fluro splices. Michael Link to comment Share on other sites More sharing options...
Headhunter Posted October 13, 2010 Report Share Posted October 13, 2010 I've been using "Super Glue" for years on my lead core rod... I simply pull back a couple of inches of the sheath, cut the core, insert my usualy mono line and glue up the overlap. I usually tack the point where the sheath ends, to hold the mono in position, allow it to dry for a minute or two, then, I saturate the two with glue... it has never failed me yet! Makes reeling in pretty much seemless through the rod guides and onto the reel. No tubes required. HH Link to comment Share on other sites More sharing options...
hirk Posted October 13, 2010 Report Share Posted October 13, 2010 How does it look for the final assembly to pass through a rod's guides? Is it smooth enough to not pick up weeds? One of my biggest peeves is the algae blooms here on Lake St. John accumulating on my braid to fluro splices. Michael It should be fine for guides,the tubing comes in various dia.,if you use the smallest tube that accepts the line shouldn't be too bad for algae. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now