Gail Posted November 16, 2009 Report Share Posted November 16, 2009 Ok, i'm finally sick of using my hand auger and I am in the market for a new gas auger. I mostly hard water fish on simcoe and scugog and I always walk out pulling my equipment along with me. Would anyone out there have some insight as to which make or model I should be looking at in regards to reliability, weight and dollar value ...... or even better yet, what to stay away from. Thanks to everyone in advance for any help you can offer! Link to comment Share on other sites More sharing options...
wallyboss Posted November 16, 2009 Report Share Posted November 16, 2009 If you want light weight then the Strikemaster 4 stroke is the one you want a bit on the pricey side but well worth it if you have to walk everywhere you ice fish. I have a Jiffy 3hp and I love it but I also have the Quad to tow everything with. Link to comment Share on other sites More sharing options...
Jonny Posted November 16, 2009 Report Share Posted November 16, 2009 (edited) Jiffy works well for me. Watch Walmart - they sometimes have them on sale. How thick is your ice usually? Up here on Nipissing you'll kill yourself with a hand auger, but on Simcoe your ice should be quite a bit thinner? If I were faced with only 1 to 1 1/2 feet of ice I wouldn't bother with a power auger, especially if I was walking and pulling a sled. Edited November 16, 2009 by Jocko Link to comment Share on other sites More sharing options...
LucG Posted November 16, 2009 Report Share Posted November 16, 2009 I just bought a 4 Stroke Stikemaster like Wallyboss mentioned. Nice machine, can't wait to start drillin! Link to comment Share on other sites More sharing options...
Garnet Posted November 16, 2009 Report Share Posted November 16, 2009 I've own the Strikemaster 4 stroke for about 4 years it's very light 23lbs. Don't think it would stand up to Quad travel, it has plastic flutes on the drill and is generally very light. Cuts ice good but is bad for icing up around the blades. I spray it with Pam regular and don't have to much problem. Strikemaster will not admit any problem. I still wouldn,t trade it for both Jiffy 3hp I've owned. Garnet Link to comment Share on other sites More sharing options...
vinnimon Posted November 16, 2009 Report Share Posted November 16, 2009 I've own the Strikemaster 4 stroke for about 4 years it's very light 23lbs. Don't think it would stand up to Quad travel, it has plastic flutes on the drill and is generally very light. Cuts ice good but is bad for icing up around the blades. I spray it with Pam regular and don't have to much problem. Strikemaster will not admit any problem. I still wouldn,t trade it for both Jiffy 3hp I've owned. Garnet my stikemaster 2 stroke works great lots of torque.miixing is a pain butI wouldnt trade it in.had it 4 years now and no issues yet. Link to comment Share on other sites More sharing options...
Whitespinnerbait Posted November 16, 2009 Report Share Posted November 16, 2009 Jiffy 2hp Legend ......... 1. Lightweight 2. To say its easy on gas would be an understatement 3. Reliable 4. It has an Decompression button for easy cranking 5. Oh ya did I mention it was easy on Gas... Link to comment Share on other sites More sharing options...
irishfield Posted November 17, 2009 Report Share Posted November 17, 2009 I'm with WSB... 100 + holes per tank of fuel.. light weight to throw over shoulder and run and gun. Runs/drills like a charm. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now