Radnine Posted September 21, 2008 Report Posted September 21, 2008 Hi All, I have a situation with my mooring cover on which I could use some advice. The inside of the cover looks like the cat had kittens on it. It is all black and splotchy (like mildew) inside, while the outside is as clean as a whistle. Does this happen to everyone? Do I use the cover too much (without taking it off)? Or do they need regular scrubbing and I have been negligent in my duties? Any help (including the best way to clean it) would be appreciated. Thanks, Jim
jwl Posted September 21, 2008 Report Posted September 21, 2008 your cover must not be vented, that's why the mildew inside...mine on the other hand has the opposite problem, outside is getting covered with sap and pine pollen from being out at my trailer,I would also be curious as to see what people recomend to get it clean..and any other remedies for sap they may have..my leather seats have a couple marks on them from having sap on my panyts and not knowing it at the time. if your cover has no vent on it, you can probably get a place that makes covers to do it up for you pretty cheap
NANUK Posted September 21, 2008 Report Posted September 21, 2008 Sounds like you had the cover on while the boat was still wet/damp on hot sunny days, doing so, you'll get "The Green House Effect" the moisture has nowhere to go and just collects on the inside of the cover, after some time it creates mildew/mold. just wash it with a mild soap, rinse well with fresh water and let it dry in the sun. Not saying that is your problem but, make sure your boat is dry and has no water in the bilge(leaks) or have a wet/damp carpet or deck before you put the cover on. covering a boat is good practice but covering a wet boat on a hot day without adequate ventilation will eventually ruin the plywood/carpet, not to mention corrosion problems, specially to the electrical components.
Billy Bob Posted September 22, 2008 Report Posted September 22, 2008 covering a boat is good practice but covering a wet boat on a hot day without adequate ventilation will eventually ruin the plywood/carpet, not to mention corrosion problems, specially to the electrical components. BINGO, you hit the nail right on the head. I have a friend that has the same boat/motor/trailer as mine, both are over 20 years old. His is covered and left outside were mine has never spent any time outside (stored in the garage) unless it was fishing. He has had to replace his complete plywood floor and has had MANY electrical problems with this year a on-board fire. I in turn have had 23 years of trouble free fishing from my vessel. I understand not everyone can store a boat inside but IF you can it really makes a world of difference. Bob
NANUK Posted September 22, 2008 Report Posted September 22, 2008 The best $150 I spend when I bought the boat was on a swing away tongue(option), so it can fit in my garage. I still run a fan to dry it if the boat is wet after a day of fishing in the rain.
wkrp Posted September 22, 2008 Report Posted September 22, 2008 Try using butter on the pine sap stains . It works to get it off your hands .
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now