allbusiness Posted May 28, 2008 Report Share Posted May 28, 2008 Hey everyone, I'm looking into buying my first aluminum fishing boat, I've only had experience on the water before with larger sailboats and have never been on an aluminum boat before. I was wondering how much does the width of the boat affect the stability v.s the length of the boat? e.g: would a 15' boat with an 80" beam be more stable on rough water than a 17' boat with a 70" beam? also what is the smallest size boat you would recommend for georgian bay/st. clair/simcoe? again I don't have a lot of experience with aluminum boats so any feedback/opinons would be greatly appreciated. Thanks. Allbusiness. Link to comment Share on other sites More sharing options...
Clampet Posted May 28, 2008 Report Share Posted May 28, 2008 Take into consideration also, a hull's thickness, which will allow more pounding in the heavy seas. Link to comment Share on other sites More sharing options...
Sinker Posted May 28, 2008 Report Share Posted May 28, 2008 Width=stability For the waters you mentioned, a wide 17 footer would do, but you'd have to pick your days carefully. Sinker Link to comment Share on other sites More sharing options...
allbusiness Posted May 28, 2008 Author Report Share Posted May 28, 2008 I have thought about that and I would not consider buying an aluminum boat with a hull thickness any less than .100" Link to comment Share on other sites More sharing options...
silveradosheriff Posted May 28, 2008 Report Share Posted May 28, 2008 My 16'7" has a 90" beam and it handles the big water pretty well. As stated by Sinker, I do have to pick my days. :-) Link to comment Share on other sites More sharing options...
Mike the Pike Posted May 28, 2008 Report Share Posted May 28, 2008 I just downsized from an 18 1/2 foot tinny 73 inches wide. My new boat is 16.2 but has an 84 beam so far I don't see much of a difference just the new boat is heavier I would have to say the new width higher sides and deeper hull make it just as good as my 18 footer in big waves. I have a friend who has the same boat as my new 16 footer and I felt very safe in 3 to 4 foot waves. So I know my new one will serve me well I am yet to see something more than 3 foot chop. Link to comment Share on other sites More sharing options...
OhioFisherman Posted May 28, 2008 Report Share Posted May 28, 2008 I have a 17 foot SmokerCraft, actual length like 16'8" with like a 72 inch beam. Older boat(1987) and narrow compared to todays models. Lot of time on Lake Erie, some on the Georgian Bay, inland lakes in Ohio, PA, New York, there are days when I haven`t gone on Lake Erie when I had my 25 foot cruiser, others when it was no problem going over to the Erie island area with the smaller boat. Good judgment can trump a bigger wider boat. Wider boat generally more stable. Link to comment Share on other sites More sharing options...
Jer Posted May 28, 2008 Report Share Posted May 28, 2008 My last boat was 16' 8" with a 72" beam. Newer boat is 16' with an 83" beam. There is no comparison as far as stability, the wider the better. Although a little bit slower, the added stability (and roominess) of a wide beam is well worth it. My regular fishing partner is a pretty big guy (well not that pretty), 280 lbs or so. In my old boat, if he would lean over to pick up a rod, tackle box, whatever, he would darn near pitch me off the boat if I wasn't paying attention. In the new boat, he could be dancing a jig and the boat hardly rocks at all. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now