PatrickGG Posted December 18, 2007 Report Posted December 18, 2007 (edited) My Dad has a rubber track snow blower with a rip cord and wants to get a electric starter installed and a little tune up done and was wondering if anyone here can recommend me to a shop preferably located in the west end of toronto , i remember there was a shop located on Keele south of Eglinton but they are long gone any help would be greatly appreciated, Thanks. Edited December 18, 2007 by PatrickG
Rattletrap2 Posted December 18, 2007 Report Posted December 18, 2007 I would try All Seasons Small Engines. I have only bought parts from them, but the owner seems likea real decent guy! His name is Brian. 66 ADVANCE RD ETOBICOKE, ON M8Z2T7 CANADA Phone: 416-233-6838 Fax: 416-233-5339 Email: [email protected] Good Luck!
Big Cliff Posted December 18, 2007 Report Posted December 18, 2007 Why not just install it your self, it's quite easy. There are 4 bolts that hold the starter in and in most cases they will already be in the block, the top two are sholder bolts, you don't need to touch those, just remove the two bottom onesslip the starter up so that the slotted tabs fit under the sholder bolts, insert and tighten the two bottom bolts. Shouldn't take more that 20 minutes Max. New starters are usually between $150.00 and $200.00 bucks. You'll need your modle number and serial number to make sure you get the right one for that machine. As for the tune up on those units, I'm not even going to try to type out how to get at all the bushings, belts, bearing, and chains LOL.
bigbuck Posted December 18, 2007 Report Posted December 18, 2007 I'm not sure if they can put a starter in a machine that does not already have one. That said, the ChainSaw Clinic on Weston Road just south of the 401 is a good place to go. They are very helpful and should be able to take care of you.
Fisherman Posted December 18, 2007 Report Posted December 18, 2007 If the motor has the spot for the electric starter, remove the little side plate and see if the flywheel has the toothed ring on it, if so, it's an easy install. If not, maybe not worth the effort.
iceguy Posted December 18, 2007 Report Posted December 18, 2007 I go to both places and there very good. like bigbuck said I never heard anyone adding a starter to a machine, but your's might have the bolt hole's to attach it.
PatrickGG Posted December 19, 2007 Author Report Posted December 19, 2007 I will take a look at the snow blower when i go visit him this weekend if i see that a starter can be added i will make a couple of phone calls, Thanks for the help.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now