Jon Posted February 13, 2015 Report Posted February 13, 2015 I am considering purchasing this unit to replace my existing x67c ice machine. I like the GPS, included Navionics mapping and down scan on the Elite-4 but I'm not sure how this unit would work for ice fishing. I see there is a flasher option for the Elite-4 so that gives me some comfort that it should be good on the ice. Any experience or thoughts on the unit in general or how it would work on the ice are welcome (e.g. would I need an ice-ducer or can I get by with the original transducer). Thanks in advance, Jon
LostAnotherOne Posted February 13, 2015 Report Posted February 13, 2015 I purchased the Lowrance Elite 4 Ice Machine a few months ago bud. Your going to have to buy another transducer. I think they go around $50, but I might be wrong on that. Works great and seen fish on it, but nothing has hit it yet. I'm going to use mine with my boat so I'm going to have to grab another transducer for that. Good luck
Paudash Posted February 14, 2015 Report Posted February 14, 2015 just spent months of research on this topic and I was all over the map with these and I went over board and bought the Humminbird 899 be careful with the down imaging, you are only seeing 8 feet of the bottom in 8 in 30 feet of water look into side imaging so you get a real view
Basschaser77 Posted February 16, 2015 Report Posted February 16, 2015 After a lot of research, I recently bought the Elite-4 and the PPP-18i ice pack. I am pretty sure if you already have the ice-ducer from the X67C it can be used with the Elite-4 but you will need an adapter to plug it in.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now