bassmaster4 Posted March 27, 2012 Report Share Posted March 27, 2012 I never use backing on my braid and have found that after a while it gets messed up. For example the braid just pulls off the spool without any drag being used, also I cast out and find that i cannot reel in my bait and have to pull it in by hand. I'm pretty sure that it is because the braid isnt on tight on enough. Now onto my question, what kind of line do you use for backing? I heard from a buddy of mine that if you put some electrical tape or hockey tape on the spool before you tie the braid on and spool your reel it helps, can anyone else say the same? Thanks Bassmaster4 Link to comment Share on other sites More sharing options...
Joeytier Posted March 27, 2012 Report Share Posted March 27, 2012 I use whatever 8-12 lb mono I happen to have kicking around and put maybe 20-25 yards on. Use a back-to-back uni and connect your braid. Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted March 27, 2012 Report Share Posted March 27, 2012 I posted a Good Video on rigging up braid the other day. If you follow the instructions on attaching to the spool it will never slip, ever!!! Link to comment Share on other sites More sharing options...
mike rousseau Posted March 27, 2012 Report Share Posted March 27, 2012 i just tie it on the spool like normal... then put a piece of electrical tape over the loop you just formed around the spool... then fill her up with some tension on the line... always works for me... never slips... Link to comment Share on other sites More sharing options...
bassmaster4 Posted March 27, 2012 Author Report Share Posted March 27, 2012 thanks guys! drifter, i used your video and did it exactly how he showed, the knots were tricky lol now im all spooled up and ready to go thanks a lot! Link to comment Share on other sites More sharing options...
Fish4Eyes Posted March 27, 2012 Report Share Posted March 27, 2012 Even though its too late now since you've done it, but on larger capacity spools I like to put extra mono so that I need to use less braid. Over the years I have found that when I replace my braid, 3/4 into the spool the braid has not even touched water, so may as well fill that part in with mono. Link to comment Share on other sites More sharing options...
bassmaster4 Posted March 27, 2012 Author Report Share Posted March 27, 2012 thanks anyway fish 4 eyes, a good way to save line and save money. Will definately do that next time i go to respool. Thanks again Link to comment Share on other sites More sharing options...
Raf Posted March 27, 2012 Report Share Posted March 27, 2012 next time you re-spool just reverse the line that's currently on your reel if you filled it completely with braid. it's be good as new. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now