vinnimon Posted November 29, 2010 Report Share Posted November 29, 2010 Does anyone here know where I can get new motors in the hamilton or gta area! One is on its way out,and the other isnt performing up to par! Is bay distributors in north bay still around? Thanks in advance Link to comment Share on other sites More sharing options...
vinnimon Posted November 29, 2010 Author Report Share Posted November 29, 2010 I found 3 in north bay and grimsby bait is looking as well! OUCH!!!!!! with NB prices for 2 I can buy a new electric rigger! On the one I have,I think the main gear is worn, the other the motor, windings are going for the carper! Link to comment Share on other sites More sharing options...
HTHM Posted November 30, 2010 Report Share Posted November 30, 2010 take the motors into duke electric on Barton, they might be able to rewind them. Link to comment Share on other sites More sharing options...
irishfield Posted November 30, 2010 Report Share Posted November 30, 2010 If it still runs.. it's not the windings.. brushes maybe. Rebuilder would be where I would go first. I get my aircraft starters refurbished for under $80, just down the road, with brand new bendixs and solenoids. New they are $489 ! Link to comment Share on other sites More sharing options...
HTHM Posted November 30, 2010 Report Share Posted November 30, 2010 If it still runs.. it's not the windings.. brushes maybe. Rebuilder would be where I would go first. I get my aircraft starters refurbished for under $80, just down the road, with brand new bendixs and solenoids. New they are $489 ! Durn ingineers, always makin us handy guys look like idjits.... Thanks for the tip, Wayne, handy having an electrical engineer at our disposal Today was not a waste, I learned something. Link to comment Share on other sites More sharing options...
irishfield Posted November 30, 2010 Report Share Posted November 30, 2010 They're definitely a brushed motor Albert.. bein low volt DC and all ! Probably a real cheap repair... and you had Vince pointed in the right direction for sure. As for Bay Distributors.. they are Canon's repair facility and they've been great to me.. of course I got all mine repaired under warrantee for free... Link to comment Share on other sites More sharing options...
NANUK Posted November 30, 2010 Report Share Posted November 30, 2010 Cannon has a lifetime warranty on the motor, I would be calling their service center, I have had good experience with Mike's Reel Repair in BC (One of Cannon service center) Link to comment Share on other sites More sharing options...
John Posted November 30, 2010 Report Share Posted November 30, 2010 As Stonefish says they have lifetime motor warranty because they are usually bulletproof and rarely have an issue. I am guessing that you are not getting power (sufficient power) to the motor and need to bypass the switch and circuitary to test each motor. Try taking getting power to the motor directly and if the rpm increases you have a switch or circuitary problem. If this doesn't work, I have a very good contact at Cannon who is very helpful. Before you spend money on motors that may be OK try the direct power and see what happens first. If not let me know and I will hook you up. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now