dada2727 Posted May 24, 2009 Report Share Posted May 24, 2009 Just wondering what everyone would use for glueing a rodtip back on. Turns out the guy I got to put it on didn't do a smasher of a job. Will good ol' crazy glue do the trick? Link to comment Share on other sites More sharing options...
rbaquial Posted May 24, 2009 Report Share Posted May 24, 2009 (edited) Super Glue should do the trick.... but the problem may lie in how STRONG the glue is... But cause its on a ROD TIP... there isn't much "Pulling Action" going on... aside from the natural friction coming from the line exiting your rod tip (especially when a fish is on the other end)... but it should be ok.... Personally though....I wouldn't trust my gear with it. Probably better going to get the glue thats INTENDED for that use... Last thing you'd want is catching the 'Biggest Fish' of your life... and the rod tip failing.... and making fighting the fish THAT MUCH MORE difficult. Edited May 24, 2009 by Addikted2Fishin' Link to comment Share on other sites More sharing options...
Stern Rules Posted May 24, 2009 Report Share Posted May 24, 2009 I used crazy glue and it worked fine but you have to make sure you line the tip up quick because the glue sets in a couple seconds. Mark the tip first and it'll be a lot easier. Link to comment Share on other sites More sharing options...
muddler Posted May 24, 2009 Report Share Posted May 24, 2009 The best stuff is called 'ferrule cement'. Archers use to put on arrow heads. It is a thermal glue that you heat up like a glue stick. It isn't as soft a a common thermal glue stick. Google "ferrule cement" and you find a lot of descriptions. One stick will last you a lifetime. Simply heating up the tip top with a lighter makes adjusting and change it a snap. Do NOT use crazy glue. If you do, them removing the tip top or adjusting it later is very difficult. you may have to cut the tip top off later. Anybody that sells archery supplies should carry it. I got mine at laBarons over 20 years ago. If the rod has any real value to you, use ferrule cement. muddler Link to comment Share on other sites More sharing options...
Garnet Posted May 24, 2009 Report Share Posted May 24, 2009 I use hot glue stay a little pliable . Garnet Link to comment Share on other sites More sharing options...
Spiel Posted May 24, 2009 Report Share Posted May 24, 2009 5 minute epoxy. Link to comment Share on other sites More sharing options...
Fish Farmer Posted May 24, 2009 Report Share Posted May 24, 2009 (edited) I use any glue stick. Just heat with a match. The broken peace comes right out as well. Works great for me. I carry a small peace in my box for fixing my stepped on rods. . Plus carry a bigger tip eye, case you brake a little farther down, on those BIG ONES I know Spiel, Shut-up farmer. Chris,what do you use for Stretch marks on your fishing rod Edited May 24, 2009 by Fish Farmer Link to comment Share on other sites More sharing options...
Rodwrap Posted May 24, 2009 Report Share Posted May 24, 2009 I've built hundreds of rods using plain ol' 5-min. epoxy.Sets in minutes, strong, & can be easily removed with a touch of heat from a BIC lighter. Link to comment Share on other sites More sharing options...
musky66 Posted May 24, 2009 Report Share Posted May 24, 2009 Important to have the right size tip top for the blank,when it is nice and tight- crazy glue seems to hold fine. Link to comment Share on other sites More sharing options...
jace Posted May 25, 2009 Report Share Posted May 25, 2009 I use 2 part epoxy also. the tip might not take too much of a pulling load, but it gets a lot of twisting which is where typical home hotmelt fails because they're not very sticky. hot melt from archery shops or Gudebrod's hotmelt ferrule cement is gummy and sticky and much better if you you insist on using a hot melt glue. Link to comment Share on other sites More sharing options...
fishboy Posted May 25, 2009 Report Share Posted May 25, 2009 I've built hundreds of rods using plain ol' 5-min. epoxy.Sets in minutes, strong, & can be easily removed with a touch of heat from a BIC lighter. 5 min epox is what the local experts told me Link to comment Share on other sites More sharing options...
Spiel Posted May 25, 2009 Report Share Posted May 25, 2009 5 min epox is what the local experts told me :D :D Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now