blarg Posted September 25, 2008 Report Share Posted September 25, 2008 Hey, im having a couple of small issues with my boat, its a new crestliner fishhawk, the first issue is i have quite alot of play in the steering before the engine starts to move, its a safe-t model, and my outboard shakes a little on idle, i didnt notice this when it was brand new but i know ive seen it on other outboards. So, would anyone know where or how i could find info on how to adjust the steering, and is the slight shake anything to worry about or can i tighten it. thanks Link to comment Share on other sites More sharing options...
Fisherman Posted September 25, 2008 Report Share Posted September 25, 2008 What kind of outboard? 2 Stroke of be expected to shake. Link to comment Share on other sites More sharing options...
blarg Posted September 25, 2008 Author Report Share Posted September 25, 2008 its a mercury 4 stroke 50, and the shaking is very slight Link to comment Share on other sites More sharing options...
tinbanger Posted September 25, 2008 Report Share Posted September 25, 2008 MY 90 4 stroke has almost no shake , hows the prop? the streeting sounds ok , I have play at idle which is goNe under power. TB Link to comment Share on other sites More sharing options...
Radnine Posted September 25, 2008 Report Share Posted September 25, 2008 I too have a new Crestliner Fish Hawk (1600). If anything, on mine the steering is too tight. There is absolutely no play and no shaking. It is as solid as Sears. I loosened off the steering tensioning screw on the motor and (especially when under load) there are times when I have to use two hands to turn the wheel. I had it back to Proctors and they said it was normal (the newness perhaps?). Sorry, I know that this doesn't help you much, except to say if it's new, get it back to the dealer. Jim Link to comment Share on other sites More sharing options...
musky66 Posted September 25, 2008 Report Share Posted September 25, 2008 My Yammy 115 four/fuelie has a small vibration at idle ( not really a shake), steering has some looseness but not much. Haven't seen a non-power steering boat with great steering yet- nature of the beast. Steering should be pretty effortless at normal speeds as long as boat is trimmed properly. Link to comment Share on other sites More sharing options...
Bernie Posted September 25, 2008 Report Share Posted September 25, 2008 There should be no play in the steering. Look at the shaft of the steering cable where it comes out to the engine. It should immediately move when you turn your steering wheel. If it doesn't see your dealer right away to have it repaired. Make sure all the connections are tight. This shaking you are feeling, is it only when you have it in gear or in neutral? Link to comment Share on other sites More sharing options...
Billy Bob Posted September 25, 2008 Report Share Posted September 25, 2008 (edited) Shake, shimmy, turns hard, turning seems loose. I hate to say it but this stuff is just something that has to be expected. I did once have the steering break on me, now that's a problem when you're a few miles from the launch. Have fun with your new boat and REMEMBER the definition of a boat is ............. hole in the water you keep pouring money into Edited September 26, 2008 by Billy Bob Link to comment Share on other sites More sharing options...
bassjnkie Posted September 26, 2008 Report Share Posted September 26, 2008 I have a 50 4 stroke, it has little vibration, not much. My steering has no play. Link to comment Share on other sites More sharing options...
blarg Posted September 26, 2008 Author Report Share Posted September 26, 2008 thanks for the replies, i figure its likely no big deal, but it was bugging me. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now