silveradosheriff Posted December 14, 2007 Report Posted December 14, 2007 (edited) OK, so finally got around to taking a picture of the Bert's system on the boat. There are two 4 foot tracks on the sides with the 8 foot bar across the back. Here is a pic of the whole system: One major safety component for the bigger water is that the riggers are mounted much higher up than they were before. This results in a much easier handling of the rods when the salmon hit, with the bar serving as a safety device as you can brace against it. I'm running the ratchet rod holders which I highly recommend. Here is a closer shot of the one side: I'll be running two sets of Salties off the sides for the inline boards and/or dipseys off the braid and wire. Followed by a side shot: Still to come is the 9.9 kicker which will be added in the spring. More as an alternate power source as the F-90 does a great job trolling in terms of sound and fuel economy. In the larger rollers, a single point of power failure is not a good thing! :-) Edited December 14, 2007 by silveradosheriff
Greencoachdog Posted December 14, 2007 Report Posted December 14, 2007 Is that white stuff on the ground some kind of volcanic ash or something?
Pigeontroller Posted December 14, 2007 Report Posted December 14, 2007 Nice setup Rod, good lookin' motor too!
LeXXington Posted December 14, 2007 Report Posted December 14, 2007 Very nice, setup there, your right about the height, Makes a huge difference when grabbing the rods
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now