DRIFTER_016

WOW!!!!! This young girl is absolutely incredible!!!!! This is her Youtube channel: https://www.youtube.com/user/malabar777/videos And a couple of videos from it.

Still have 8 more weeks of open water until the boat goes away.

Mine doesn't snore too much but he does run and twitch in his dreams as soon as he falls asleep. You can hear him kicking the wall or bed or if sleeping on the bed he kicks me!!!

I shore hope so!!!!

Look @ the nose of the boat. It was driven up there.

From the FLW tour. Camera boat zigged when it should have zagged!!!

There are plenty of vehicles on the market with factory installed inverters these days.

Is it a 2 stroke or 4 stroke? If it's a 4 stroke it very well could be an issue with the decompression valve.

Sorry for your loss Wayne.

This looks like a great idea!!! The only issue I see is snow covering the camera or display during winter. https://www.facebook.com/Arch2OMagazine/videos/995934467084580/

Great news that they are looking after you!!! Bad news that it was a major issue.

Make sure it's fully charged before you run it.

I'll stick to building rods, floats and tying flies. Not as messy!!!!

They're everywhere!!!!

They are much more unpredictable!!!

No need to be afraid of bears. You're much more likely to be attacked by a crack head!!!!

Check with Canadian Tire. They have tools to loan. FREE!!!

PFFFFFT!!! Bears!!!! Had bears sniffing @ my tent in Alaska. My buddy had a grizz pushing in on the side of his tent once. He punched it in the face because the muzzle flash from the 44 magnum would not be healthy for the tents nylon!!! Cars are much more bear proof than nylon!!!!!

When I'm travelling I will park where ever. Usually a rest area but have been known to just park on the street or in a gas station parking lot if needed.

You need one of these!!!! PS. I need one too!!! http://www.lowrance.com/en-CA/Products/Fishfinder-Chartplotter/HDS-12-Gen3-en-ca.aspx

If all goes according to plan, this (or a reasonable facsimile) is what it should look like when finished. http://www.anglersparadise.ca/category/cabin-design/

Joe, those notches are for the outriggers. They connect the fly rafter to the roof to create the eve's overhang on the gable ends of the building.

Well after running it this weekend the paint's already peeling. I'll strip it in the winter and polish 'er up.

Got out with the new prop and it seems to work pretty good!! Need to mess around with the vent plugs to try and get the hole shot better but I can run it trimmed up higher and with the jack plate raised 3 1/2" without cavitation. In shallow water when docking or maneuvering I can lift the jack plate all the way and trim higher than before and have better control.