live well leaks

[walleyedreamer]

i have an 2004 Alumacraft navigator sport 175 and some where in the live, there's a slow leaks. i put a plug in. and it still leaked. so i seal around the plastic nut with 3m marine adhesive sealant fast cure. and it still seems to have a slow leak i was thinking of spraying the whole in side of the live well with some thing. but not sure what to use. i can not see any hair line cracks in side live well. any ideas out there. on spraying the in side of the live well and not harming the fish. live well in front of wind shield.

thanks Chris.

[OhioFisherman]

That stuff they use for pickup beds might work, just me but I would want a livewell fixed right.

[aniceguy]

is the livewell a rotationally molded plastic, an aluminum or plastic lined one?

[misfish]

Check the areas where the water is released also all the clamps at the pumps and hoses.Is it a full one piece tank or are the ports connectors.Maybe the seals are not tight enough.Also make sure it,s the right plug.

I dought it,s cracked but I could be wrong,has happen.LOL

 

As for the truck stuff,Thats not going to seal it,if it is cracked,it will still seperate from the pounding when full. IMO

Edited June 11, 2007 by misfish

[walleyedreamer]

the live well is moulded plastic rectangle in shape with angle near the ends. one piece. i have not check the clamps and you would have to take the whole front floor out which is riped in place, too much work. to put a liner in. i check the clamps. there's a round button with a plastic tube solid. that open and closes a value to release the water out of the live well under neath where the battery are.opening there. to act cess where the clamps are if that does not work. and i have the right plug. still open to ideas. happy fishing, see you on the water walleyedreamer.

Edited June 11, 2007 by walleyedreamer