Fisherpete Posted February 14, 2015 Report Share Posted February 14, 2015 (edited) I'm a newbie to the HDS world... If I have two units on the boat, front and back, what is required (or is it possible) to do the following: 1) Share GPS/waypoint info 2) Share one transducer (will likely go with 2, transom and trolling motor but just curious) 3) Share one Navionics map chip 4) Transfer my waypoints and trails from my Elite-5 unit to the HDS units Thanks guys Pete Edited February 14, 2015 by Fisherpete Link to comment Share on other sites More sharing options...
dracokaos Posted February 14, 2015 Report Share Posted February 14, 2015 I was just at Radioworld and was speaking to sales regarding these very questions. First, you can't network Elite and HDS units. You can network HDS units together and they will share waypoints. If I remember correctly the gen 2 HDS units can transfer and share one transducer. cheers Link to comment Share on other sites More sharing options...
ecmilley Posted February 15, 2015 Report Share Posted February 15, 2015 Ethernet cable is all thats required are u running gens 2 or touch screens? Link to comment Share on other sites More sharing options...
Fisherpete Posted February 15, 2015 Author Report Share Posted February 15, 2015 Both are gen 1 units... Ethernet is the yellow cable? Thanks Pete Link to comment Share on other sites More sharing options...
Wolf 3 Posted February 15, 2015 Report Share Posted February 15, 2015 Both are gen 1 units... Ethernet is the yellow cable? http://radioworld.ca/ethext-15yl-p-6416.html You will need a map chip for each unit if you want to have the detail of the nav chip on both units. Link to comment Share on other sites More sharing options...
Fisherpete Posted February 15, 2015 Author Report Share Posted February 15, 2015 (edited) Been doing a bunch of reading today. From what I understand, linking the two GEN 1 units with the ethernet cable will allow the two units to do the following: share waypoints, trails and routes share a single transducer DOES NOT allow you to share a map chip. You still need a chip for both units. (which I have) I may go the single transducer route. My trolling motor (Motorguide Wireless 45) is a PITA to hook up a transducer cable because of the way the shaft slides thru a collar when you stow/deploy it - you can't attach the transducer cable very well to it. If anyone has managed to come up with a solution for this I'm all ears - or if anyone knows if I could upgrade my trolling motor head to have a transducer built in, even better! I am going to call Rocky's in Orillia on Tuesday to see if he can do this and what it would cost. Thanks for all the help, keep it coming! Pete Edited February 15, 2015 by Fisherpete Link to comment Share on other sites More sharing options...
Lunkerhunter Posted February 15, 2015 Report Share Posted February 15, 2015 Get a terrova and sell the motor guide. Hahahaha. Then you are all set Link to comment Share on other sites More sharing options...
Fisherpete Posted February 15, 2015 Author Report Share Posted February 15, 2015 I'll start shopping a kidney around Andy... Would love to hop up to 24V 70lb Terrova with all the bells and whistles. Probably not gonna happen anytime soon. If I can just swap in a Motorguide powerhead with built in transducer for a few hundred bucks that's the route I will probably take... wonder if they could make it into a 55 instead if a 45 at the same time? HMMMMMM LOL Link to comment Share on other sites More sharing options...
porkpie Posted February 16, 2015 Report Share Posted February 16, 2015 Pete, I might be selling a 55lb thrust motorguide with universal sonar and wireless pedal and key fob in the spring, depending on if the wife will let me get a PD V2 ipilot. You want me to let you know if I do? Link to comment Share on other sites More sharing options...
Fisherpete Posted February 16, 2015 Author Report Share Posted February 16, 2015 Sure! PM me details please. 55lb is still a 12V system, correct? Link to comment Share on other sites More sharing options...
porkpie Posted February 16, 2015 Report Share Posted February 16, 2015 (edited) You got it, it will be awaiting approval from the iron bank of bravos though (wife). I'll PM you before the ice melts if i can convince her! Still 12 volt. I just bought the boat it's sitting on, so I'm not really sure how well this is going to go lol. Edited February 16, 2015 by porkpie Link to comment Share on other sites More sharing options...
AdamS Posted February 16, 2015 Report Share Posted February 16, 2015 (edited) Hey Pete, I'm not sure about the gen1 units but I have a gen2 and was told that you can link an hds unit to an elite unit via the nmea 2000 network. It will allow you to share waypoints but that's it. I'm hoping thats true because I haven't installed the elite unit that I have yet but thats what my plan is. In terms of the other things: share waypoints, trails and routes share a single transducer DOES NOT allow you to share a map chip. You still need a chip for both units. I believe you are correct. the gen2's allow you to share a map chip, I don't know if the gen1's do. check here too for info http://www.bbcboards.net/lowrance-garmin-sonar-gps/ Edited February 16, 2015 by AdamS Link to comment Share on other sites More sharing options...
Fisherpete Posted February 16, 2015 Author Report Share Posted February 16, 2015 Thanks Adam! porkpie - hope you were nice to her for Valentines day LOL. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now