question about installing handle bar warmers.

[richyb]

can i use the power from my reverse buzzer on my sled to power my new handle bars?

[Bernie]

This is a question with a lot of variables.
What kind of machine is it? Many of modern snowmobiles use computers to operate circuits. So you need to know for sure where you are getting your power.
How many amps are the heaters going to use? You need to know if the circuit you are tapping into can handle the power needs.

It's possible you may need to use a relay to power them up correctly.

[richyb]

Its a 1999 yamaha enticer 2. It does not have a battery.

[Bernie]

I have no access to Yamaha wiring diagrams Richyb.
Not likely a computer controlled sled.
I'd likely look at the lighting circuit for a source of power. Often the tail lamp is always powered.

[irishfield]

What amp draw do the hand warmers have??? .. and what is the output from the stator/ regulator on the machine? After headlight and ignition how much allowable draw is left? Can't imagine they're a really high draw item, but I'd be making sure before blowing what is running your ignition and lights.

[Dara]

If you only want warm hands when backing up