Tootsie II Posted August 26, 2011 Report Posted August 26, 2011 (edited) Over the lasy year or so my fishing partner have been having a problem getting our three burner Guide Series Coleman stove to burn properly. We get a tremendous amount of sooting and orange un-pressurized flame instead of the bright steady blue flame that we used to get. Last year I installed a new generator but we still have the same problem. My Stepson who is in the Canadian army says they have the same problem and attribute it to the pooling of unvapourized fuel in the piping ( ie: flooding). My question is: Does anyone else have the same problem and do you know if the naphtha manufacturers have also started adding "bloody" ethanol to their product. You probably get a feeling of what I think about ethanol-gas mix. Any comments or help would be most welcome. Also, these stoves are sold in the U.S. as being dual fuel, the second fuel being gasoline. I was wondering if using a high octane gas would make a difference and be safe. Edited August 26, 2011 by Tootsie II
jimmer Posted August 26, 2011 Report Posted August 26, 2011 Gasoline in a stove????? I don't really know much about burning naptha other than I remember my parents using it when we went camping as a kid back in the 60's. I don't know if I would ever feel comfortable using regular gas in a stove system.
bubbles Posted August 26, 2011 Report Posted August 26, 2011 Nope, don't use gas Nope, they do not add Ethanol to it I sell chemicals for a living I would start by cleaning out all the pipes and burners, my guess would be that they are clogged with rust (burners) or have spider webs in the pipes..... just a guess
jedimaster Posted August 26, 2011 Report Posted August 26, 2011 (edited) If you have a gasoline compatable stove your supposed to use gasoline with the lowest octane rating. I am not sure what effect ethanol would have on it. I used to have a multi fuel stove that would burn everything from diesle, naptha, gasoline, jet fuel etc.... It got ran over by a truck. Edited August 26, 2011 by jedimaster
Tybo Posted August 26, 2011 Report Posted August 26, 2011 You can not burn gas unless it's a true duel fuel.The seals are of a different compond. In the old day's,they burnt off the gasoline.They only had a need for naphtha and karosene.
woodenboater Posted August 26, 2011 Report Posted August 26, 2011 Are you getting enough pressure in the tank when you pump ? I just resurrected a super old brass tank Coleman and it fired up fine, blue flame and all, just needed to have the pump leather lubed and reconditioned which is easy peasy. Same generator and pump. I've never used a dual fuel, do you need to swap anything out when going from white gas to auto ? A gurgling sound will tell you the fuel has condensed in the tube and I usually just tip it out to drain.
Tybo Posted August 26, 2011 Report Posted August 26, 2011 I believe it's just seals for the oilier gasoline.Plunger and flow valve. My old multi fuel stove was a woods.The only thing I didn't try to burn in it,was crude.
Muskieman Posted August 26, 2011 Report Posted August 26, 2011 I burn Regular U/L in mine all the time and it's not a dual fuel.. it's about 40 years old... just gets my pots "smokey" with a suit on them.. Regular U'L is less volatile than Naptha ( white gas) I've had the "orange" flame and spitting a few times but.. nothing a pipe cleaner didn't fix. Randy
EddieNorth Posted August 27, 2011 Report Posted August 27, 2011 Ive used regular gas in my coleman for 30yrs never had a problem and its a heck of a lot cheaper.It also works in lanterns aswell,, Cheers, Eddie
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now