Oggie Posted March 24, 2011 Report Share Posted March 24, 2011 I've got a princecraft DLX that has really uncommon gunales. The lip is over an 1.5" (haven't measured it since fall). I'm trying to find rod holders that mount to a gunwale that isn't square or round and it's quite a deep edge on the inside. Anyone found a rod holder that works and how do you install it. I've bought a Scotty rod holder and I'm wondering if I just need the back accessory that allows instalation. Thanks for any help you can offer. I'd take a pic but the boat's stored. Dan O. Link to comment Share on other sites More sharing options...
Ricky Bobby Posted March 24, 2011 Report Share Posted March 24, 2011 What I did was add a piece of 3 x 6 aluminum and screwed it to the side wood and the under wood (you will know what I mean) back by the rope tie off. Then I screwed the rod holder there on top of the aluminum. Has worked well for muskie fishing. Link to comment Share on other sites More sharing options...
darsky Posted March 24, 2011 Report Share Posted March 24, 2011 (edited) www.trojantackle.ca Edited March 24, 2011 by darsky Link to comment Share on other sites More sharing options...
John Bacon Posted March 24, 2011 Report Share Posted March 24, 2011 Is this the Holiday DLX? If so can you mount them to the decking in the back corners at the stern instead of on the gunwhales? I ran a plank across the whole width of the boat so that I could mount downriggers. It would be overkill for just downriggers but it would work. Link to comment Share on other sites More sharing options...
Oggie Posted March 24, 2011 Author Report Share Posted March 24, 2011 Thanks guys. John its the Starfish DLX. I did mount one holder on the small aluminum plate on the corner. The other one has a nav light in it. I'm gathering the gunwhales are a problem then for most mounts. Rick, do you mean on the stern wall next to the motor above the shelf that runs across the back? Is Ok to mount rods that far back? I figured it might be better up the boat a ways. Dan O. Link to comment Share on other sites More sharing options...
Fish4Eyes Posted March 24, 2011 Report Share Posted March 24, 2011 I wouldn't mount it all the way at the back, as it decreases the amount of leverage you have to set the hook, especially if you fish toothy things. Just my opinion. Link to comment Share on other sites More sharing options...
oldphart Posted March 24, 2011 Report Share Posted March 24, 2011 ~~~I make a great rod holder, when do you want to go phishen?? Link to comment Share on other sites More sharing options...
camillj Posted March 24, 2011 Report Share Posted March 24, 2011 I wouldn't mount it all the way at the back, as it decreases the amount of leverage you have to set the hook, especially if you fish toothy things. Just my opinion. Also .. nice to be able to be looking forward at your rod and were you are going (Tillers rule) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now