CrappieCamo Posted April 27, 2010 Report Share Posted April 27, 2010 Since I prefer cork to EVA foam grip, recently I want to buy a U40 Cork Seal for my new rod. Any one knows where I can get it? I live in GTA area. Thanks! Link to comment Share on other sites More sharing options...
CrappieCamo Posted April 27, 2010 Author Report Share Posted April 27, 2010 nobody knows? Link to comment Share on other sites More sharing options...
MJL Posted April 27, 2010 Report Share Posted April 27, 2010 Give Angling Specialties (Scarborough location) a call. I can't remember if I saw the U40 Rod Bond or Cork Seal in the counter but it's worth a call. U40 products (Let alone rod building products) in general aren't widely available in the GTA. I used to get whatever U40 products (like Rod Bond, Brush cleaner and Permagloss) from Mudhole in the States. Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted April 27, 2010 Report Share Posted April 27, 2010 (edited) I just use a couple of coats of Birchwood Casey gun stock finish on my handles. Stock finish can be picked up at most gun shops, including Lebarons. If you want the U40 product you will have to mail order it most likely. Here's a couple of shots of my latest handle built on a Sage Z-Axis 7136-4 blank. Edited April 27, 2010 by DRIFTER_016 Link to comment Share on other sites More sharing options...
Spiel Posted April 27, 2010 Report Share Posted April 27, 2010 Why not use a wood sealer preservative (ie: Thompsons ) after all cork is a wood product. Link to comment Share on other sites More sharing options...
CrappieCamo Posted April 27, 2010 Author Report Share Posted April 27, 2010 Thanks for all the inputs! Lots of anglers recommend U40 Cork Seal on another forum, this makes me wanna try one:) DRIFTER_016, your rod looks great! Birchwood Casey Tru-Oil® Gun Stock Finish, is this the one you use? After sealing the cork, will it feel a little bit slippy and slightly harder? I really like the soft feel of cork in hand. Spiel, I've never sealled cork before. This might be my first time trying. Read another post here and know you are a rod builder. Could you share some experience of sealing cork? Link to comment Share on other sites More sharing options...
DRIFTER_016 Posted April 27, 2010 Report Share Posted April 27, 2010 Thanks for all the inputs! Lots of anglers recommend U40 Cork Seal on another forum, this makes me wanna try one:) DRIFTER_016, your rod looks great! Birchwood Casey Tru-Oil® Gun Stock Finish, is this the one you use? After sealing the cork, will it feel a little bit slippy and slightly harder? I really like the soft feel of cork in hand. Spiel, I've never sealled cork before. This might be my first time trying. Read another post here and know you are a rod builder. Could you share some experience of sealing cork? Yep, that's the stuff. Depending on how many coats you put on you will get a soft satin to a high gloss finish. That handle has 4 coats and has been sanded down with 600 grit between coats. With just a couple of coats it still feels like cork but has a bit of protection. Link to comment Share on other sites More sharing options...
Spiel Posted April 28, 2010 Report Share Posted April 28, 2010 Spiel, I've never sealled cork before. This might be my first time trying. Read another post here and know you are a rod builder. Could you share some experience of sealing cork? Actually I've never had anyone ask to have their cork handles treated nor have a I done my own. Using an outdoor weather preservative for wood seems logical though. Link to comment Share on other sites More sharing options...
solopaddler Posted April 28, 2010 Report Share Posted April 28, 2010 Personally I have no use for cork sealer or the concept of sealing cork in general. Some warm water, mild detergent and a little elbow grease and your handle is as good as new if it gets dirty. Also I'll occassionally go over my handles with very fine grit sandpaper. If they're sealed you're just removing the finish. Also don't like the look or the feel of sealed cork, but hey, each to their own. Link to comment Share on other sites More sharing options...
CrappieCamo Posted April 28, 2010 Author Report Share Posted April 28, 2010 Thanks for your help,guys! Also don't like the look or the feel of sealed cork, but hey, each to their own. me neither Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now