bow slayer Posted December 3, 2009 Report Posted December 3, 2009 (edited) does any know roughly how much to have a garage door opener installed? 1/2 horse genie screw drive with wall console. thanks. I am in the London area if you know someone that does this type work, thanks again. Edited December 3, 2009 by bowslayer
Twocoda Posted December 3, 2009 Report Posted December 3, 2009 (edited) it isnt a hard task by any means ...but if your insistent on paying someone..youll be looking at about 75 bucks..(assuming receptacle is there ).i suggest you buy yourself a case of beer instead and do it yourself... make sure you put a 2x10 or 2x8 on center of the door 4 feet long( to distribute the pull weight ) nailed to the studs/header in the wall good luck and give it a go ...it isnt hard Edited December 3, 2009 by Twocoda
Paully Posted December 3, 2009 Report Posted December 3, 2009 (edited) I install garage doors and openers for a living... Most people will charge you 80 to a hundred to install an opener. The opener you purchased is a pain in the ass to install (too many parts) The screw drive system isint very good.. its louder than a straight chain drive operator and if your door doesent operate smoothly then the opener doesent always wanna shut the door. If you have a wood door you dont really need any extra bracing to secure the top section but if its metal it is best to install a peice of punched angle spanning the whole top of the door. Home depot has Chainberlain 1/2 hp chain drive operators for 220.00 tax inc. personally i would return the genie screw drive. Edited December 3, 2009 by Shore_Lunch
pikehunter Posted December 3, 2009 Report Posted December 3, 2009 H.D charges 119.00 in the Hamilton area. If the door is over 7' high a kit is required and extension angles if headroom is over 2'. The lowest priced chain drive Chamberlain is on at 175.00 clearout price in this area.
Paully Posted December 3, 2009 Report Posted December 3, 2009 " extension angles if headroom is over 2' " lol ... i wonder how much extra they charge for some punched angle? sounds like a cash grab to me..
Twocoda Posted December 4, 2009 Report Posted December 4, 2009 punched angle is 5 bucks for 36 inches
bow slayer Posted December 4, 2009 Author Report Posted December 4, 2009 well it seems 100 bucks seems to be the rate. I would attempt it myself but with 3 kids playing hockey, working 50-60 hours a week and working on the backyard rink with my spare time,it woulld have to wait til spring. I will check more into the type I bought,so far I have heard good and bad. thanks for the replies.
GBW Posted December 4, 2009 Report Posted December 4, 2009 you can get a craftsman for less (guessing you got yours at CTC for $299) and use that $ towards the install...
bow slayer Posted December 5, 2009 Author Report Posted December 5, 2009 I did get it from CT for 199 on sale regular 349
dagoat_1 Posted December 5, 2009 Report Posted December 5, 2009 Its actually not that loud at all. We used two of the genie screw drives, also bought on sale like you. Our doors were 7' and purchased the extensions from the company over the phone and service was great. Like you the parts sat for a few months until we found some time to install over Christmas break which was ot that hard to do at all. First time installing one, give yourself a few hrs and get the kids involved.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now