Dutch Posted August 16, 2008 Report Share Posted August 16, 2008 Hey guys - got a new bilge pump put in earlier this year, but haven't had to use it too much. As such I can't speak to whther the problem below just started or has been like this the whole time. Yesterday I was looking for leaks in my boat so I filled it up with a hose. Didn't find leaks, but when the auto bilge came on, I notice that the pump was pumping out water, but just barely. Water was litterally just trickling out of the outlet and running down the back of the boat. I am used to water coming out almost like a hose and "shooting" out of the outlet, just from what i have seen with other boats. When I feel the hose, it feels like there is water in it, but it just doesn't seem to want to flow out the hole. Does this mean the capacity on the bilge pump is too low and I need a larger pump? Not sure what the specs are on the one that is in there now. FYI - boat is 18'. Link to comment Share on other sites More sharing options...
cranks bait Posted August 16, 2008 Report Share Posted August 16, 2008 You could have the intake blocked or a blocked hose. It could also be a weak pump. I had a 450 that I put in last fall and it barely trickled out. I now have a 750 in there and it is like a race horse. Link to comment Share on other sites More sharing options...
sonny Posted August 16, 2008 Report Share Posted August 16, 2008 Usually only three things to look at,,1-- battery power 2-- kinked or blocked(misrouted) outlet hose 3-- kinked or blocked inlet if all these are good throw out the pump! Link to comment Share on other sites More sharing options...
John Bacon Posted August 16, 2008 Report Share Posted August 16, 2008 The fist thing that I would check is to look for debrie in the intake. I have a lot of trees' around my dock so I have constantly having to removed twiggs, etc., from the bilge pimps intake. Link to comment Share on other sites More sharing options...
Greencoachdog Posted August 16, 2008 Report Share Posted August 16, 2008 Yes, you may want to clean your bilge... I've found the best way to do this is to leave the drain plug out while launching Link to comment Share on other sites More sharing options...
Pinch Posted August 16, 2008 Report Share Posted August 16, 2008 Yes, you may want to clean your bilge...I've found the best way to do this is to leave the drain plug out while launching Yes I found out that this works very well!!! Link to comment Share on other sites More sharing options...
nancur373 Posted August 17, 2008 Report Share Posted August 17, 2008 Yes I found out that this works very well!!! Don't have a bilge but found out it is a great way to wash the bottom of the boat. Also found ou tthe first time I launched my boat that the trailer lights aren't waterproof and the don'tike water when plugged in... Link to comment Share on other sites More sharing options...
POLLIWOGG Posted August 18, 2008 Report Share Posted August 18, 2008 Some little bugger is living in the outlet hose, I'd almost bet on it. They like outlet hoses and trumpet horns. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now