mason05 Posted January 9, 2007 Report Share Posted January 9, 2007 My water pump is running a lot louder than usual and during its cycle is "pinging" every 5-10 seconds. I think the bearings are about to go. My guess is that it's time for a new one. Any suggestions from the plummas on this board? Thanks in advance. Corn Nug Link to comment Share on other sites More sharing options...
knotaclue Posted January 9, 2007 Report Share Posted January 9, 2007 is it getting overly warm compared to normal ??? hot to the touch after its being on ??? Link to comment Share on other sites More sharing options...
snackpack5150 Posted January 9, 2007 Report Share Posted January 9, 2007 Do you have a sand point well? and if so you might have to have the pump cleaned and overhauled, if not feel the pump if it's running hot during the cycle then time for a new one as it would be more money replacing the bearings that actually buy a new pump. Hope this help Ken Link to comment Share on other sites More sharing options...
aplumma Posted January 9, 2007 Report Share Posted January 9, 2007 I am no sure what Pinging is but from the discription you are close to needing a replacement. I am not a big fan of just replacing the bearing or components because they have all worked hard thru it's life and as soon as one part wears out then the others are soon to follow. Replacing the pump as a unit will save you more than enough money because the plumber will not have to spend labor pulling,repairing, and reinstalling the unit. If you are comfortable replacing the unit yourself you can save even more money and it is not that hard to do. Art Link to comment Share on other sites More sharing options...
Daplumma Posted January 9, 2007 Report Share Posted January 9, 2007 I would add that you should do this sooner than later.These things are made now to wear out and not be rebuilt in the field.They are not all that tough to replace though. Joe Link to comment Share on other sites More sharing options...
mason05 Posted January 9, 2007 Author Report Share Posted January 9, 2007 Thanks for all the input guys. I figured I'd be looking at replacement and I'm more comfortable with new than rebuilt. I might even try to tackle it myself but I'd hate to be without water for a day or two if I bugger something up in the installation process. Thanks again for your help. Any plummas on this board from the hamilton/milton area? (Ontario of course) Corn Nug Link to comment Share on other sites More sharing options...
moemoe Posted January 10, 2007 Report Share Posted January 10, 2007 I'm in the same boat with my mother-in-laws place, where is good spot to get a water pump in the hamilton area? Link to comment Share on other sites More sharing options...
knotaclue Posted January 10, 2007 Report Share Posted January 10, 2007 I have a shallow well set up here in Burlington,and have replaced everything from the foot valve to the pressure tank myself,home depot has everything you need. it all depends on your setup ?shallow or deep and what hp your pump is. hope this helps and good luck Link to comment Share on other sites More sharing options...
snackpack5150 Posted January 10, 2007 Report Share Posted January 10, 2007 I would look at TSC stores they have a good selection of pumps and a better price than CTC. Ken Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now