brkygetr Posted June 7, 2008 Report Share Posted June 7, 2008 ok gonna make a portable fishing/hunting bivouack that is framed in PVC pipe and has a sewn 'ripstop' shell. I have been exploring the prospector tent idea for some time but just can't justify paying the price when I figure I can build one just as easy, and a LOT cheaper! For many years my friends and i have been building our own every year from cut birch saplings and covering it with poly. This works good but every year we have to rip it down and stash the poles in the bush (which rot eventually) and then throw away our 6 ml poly (which is much easier to bring IN on a roll then to take OUT in an annoying ball of plastic!) cause its full of staple holes and such. SOOO.... I am gonna build one that is made of PVC and has a permanent shell that I can just throw over top. All of this will fit into the bed of a truck or a boat easy enough and can be set up quickly. At least thats the idea. Has anybody done this???? Problems to avoid? Any help would be appreciated. Link to comment Share on other sites More sharing options...
MoriaRiverMan Posted June 7, 2008 Report Share Posted June 7, 2008 Buddy has one.......... is a cats azz. only issue i recall him saying is he burned a hole in canvas or what ever he used with heater. other than that..........its perfect. he built is in his garage with ease. Link to comment Share on other sites More sharing options...
brkygetr Posted June 7, 2008 Author Report Share Posted June 7, 2008 This one is gonna have an aluminium phalange for a small wood stove, and we have used this same system with poly for years and never burned it down so I have no concerns about that. Link to comment Share on other sites More sharing options...
Chuck Best Posted June 7, 2008 Report Share Posted June 7, 2008 I built a shed over our ski-doo,which is summered on skids,out of 11/2 PVC and it's holding up fine.....The plumber I got some pipe from said to keep it out of the sun,it'll break down if exposed too long.....Hope it works out for you ....TC and tight lines.........Chuck.... Link to comment Share on other sites More sharing options...
Greencoachdog Posted June 7, 2008 Report Share Posted June 7, 2008 You can use sunlight resistant PVC conduit, and it's cheaper than plumbing PVC. Link to comment Share on other sites More sharing options...
brkygetr Posted June 7, 2008 Author Report Share Posted June 7, 2008 right on GCD I'll check that out.....this will not be in the sun for long periods of time as I will be using it as a camp in various locations and taking it down when I leave. It is gonna be 12 x 16 though so I am a little concerened about the weight bearing on conduit ( I am assuming this conduit is only 1 inch???) Link to comment Share on other sites More sharing options...
cranks bait Posted June 7, 2008 Report Share Posted June 7, 2008 To stiffen up the tubing you could always run some dowel inside it, for the main poles anyways. It'll make it a bit heavier, but stiffer. Link to comment Share on other sites More sharing options...
johnnyb Posted June 7, 2008 Report Share Posted June 7, 2008 this sounds pretty intriguing....hopefully you will post some pics of your progress along the way! Link to comment Share on other sites More sharing options...
danbo Posted June 7, 2008 Report Share Posted June 7, 2008 (edited) Your gonna need lotsa "T's" & elbows.. I think the Redman had it right.. http://www.inquiry.net/outdoor/native/skills/teepee.htm Edited June 7, 2008 by danbo Link to comment Share on other sites More sharing options...
brkygetr Posted June 7, 2008 Author Report Share Posted June 7, 2008 I will post some pics Johnnyb as it happens...I am building it this week so i"ll give ya the progressive play by play Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now