-
Posts
10,448 -
Joined
-
Last visited
-
Days Won
47
Content Type
Events
Profiles
Forums
Store
Posts posted by DRIFTER_016
-
-
Well fancy that! I should pay more close attention!
You got any ice up there yet?
Some, behind a week or two this year.
-
Thanks Drifter!
The one from Norway is cool, but it doesn't show the daily lows!
I'm very interested in the night time temps.
If you click on long term and scroll down to the detailed long term forecast you will see it gives you projected temps at 6 hour intervals.
You actually get 2 night time temps per day early (5PM-11PM) and late (11PM-5AM) as opposed to one low temp.
You can actually see how fast the temp is actually going to drop.
-
I use 3 different sites to try and predict what our weather will be long term.
https://www.theweathernetwork.com/ca/weather/northwest-territories/yellowknife
http://www.accuweather.com/en/ca/yellowknife/x1a/weather-forecast/49534?p=accuweather
http://www.yr.no/place/Canada/Northwest_Territories/Yellowknife/
Yes I know the last one is in Norway, but they are pretty accurate most of the time.
I guess Norwegians have a lot of time to look at weather maps and stuff!!!
-
Sorry but Ontario's power costing nearly as much as our power in the NWT is ridiculous!!!!
With the tax base in Ontario the cost should be one of the lowest in the country instead of second highest in the country.
You are being hosed by the liberals.
They do after all have to pay for all of their spending don't they?
-
And us Habs fans will not apologize for having Carey Price on our team....
No need to.
-
Isn't this the same technology the smartest man on the planet (Stephen Hawking) uses?
Nice to see the kind of support you're all getting.
-
I think Reims wishes he had called in sick tonight.
Welcome back to Toronto buddy.
-
Thats the only way I can actually catch them
Nightime on the ice and its fish after fish
Ive only caught one in the daytime and its my pb at just under 5lbs
There are other ways to get em.
We get them in our nets during the open water season.
-
There is a bearing service tool kit available, that allows you to replace a press in bearings with the steering knuckle still on the vehicle. Split the lower ball joint, pull the axle out of the hub; then using a slide hammer pull the hub out of the bearing. Now with this bearing kit you pull out and press in the replacement bearing.
I have my own here at the shop, their a couple hundred to buy; but places like car quest or other part houses may have a tool loaner program for their customers to use.
Dan.
Yeah, only loaner place is CT here and I was under the gun to get my truck out of my buddies shop so he could do business again.
I still want a press though.
-
As Irish said it is a no no to burn any percentage of softwood in our wood stoves down here. No choice north because that is what they have. I cringe when I see these reality shows from the Yukon and Alaska where they cut down a pine, drag it to the cabin, cut and split it and burn it the next day. They must scrape creosote of the stack every week.
It's mostly black spruce actually.
There are pockets of birch here and there though.
-
I've almost bought one a couple of times.
Running out of room to put things.
Don't have a real garage and live in a mobile home.
I do have a bunch of goodies including an engine hoist and metal lathe though.
-
I changed out a front bearing on my Honda Pilot a couple of years ago.
What a pain in the butt that was!!! The bearing is actually pressed into the steering knuckle.
Have to take the knuckle off and head over to a shop to get it pressed out and the new one pressed in.
The part isn't expensive but there is a lot of labour to do the job.
Specialty socket to remove half shaft nut.
Much difficulty removing said nut. Axle stand two 1/2" extensions, 1/2" breaker bar and 6 foot pipe + 250# guy jumping on the pipe tor break the nut free. Torque to 250 ft lbs. when reinstalling.
-
-
406.4 millimeters is the correct length.
-
However as per Dave's buddy, that's a whole new game. Most you would hope would be tested on a dyno to ensure speed is as accurate as possible with that much change. Not a mechanic nor will I ever claim to be...
Adjusting the speedo for tire size is now a simple setting in the on-board computer with a laptop on most new vehicles.
-
Well considering my buddy just bought a brand new Jeep Wrangler 4dr and the stock tires are P24575R17's and my he got it with 35 12.50R17's from the dealer.
Stock 31.5"
Aftermarket (from dealer) 35"
Difference 3.5" and 11.1%
-
He'll be fine!!!!
McDavid hasn't scored a goal in 7 games!!!
-
Not hard to understand at all Cliff when you realize the instigators are all paid to cause trouble by George Soros.
For instance the protesters in Austin Texas were all bused in to create havoc!!!
http://www.freerepublic.com/focus/f-news/3492176/posts
These protesters are being gathered by the same people that did it during the election.
It's all the doing of a billionaire globalist trying to cause a revolution in the US to get his way.
We can only hope the evil old man croaks soon.
http://dennismichaellynch.com/soros-funded-group-organizing-massive-anti-trump-protests-nationwide/
-
-
-
His idea of a "tune up" was to take an old ladies 440 Newport for a full throttle boot to Orillia and back !
YUP!!! Just gotta blow out the carbon and she'll run like a Swiss watch!!!
-
That price is why I do my own service!!!
-
I will remind people that the lure maker is taking steps to help the original poster solve his issues kudos to them,
Art
Yes, but if we can help the OP to tune his lure and not have to send it in for warranty he'll be ahead by not having to pay shipping to return it.
Would likely be as much as the lure is worth.
-
2019-2020 Hockey Thread
in Non-Outdoors Open Discussion
Posted
TSN4