DaveRoach Posted April 7, 2016 Report Share Posted April 7, 2016 Hey all, I am wondering if anyone can help me with setting up networked Humminbirds 899 SI DI console and 859 Bow hooked to the Terrova US2 Ipilot link? I am reading I will need a hub for this setup, but cant find much info on how to set these components work together. I assume the two Sonar will be on the starting battery and the trolling motor on its own. Any help with wiring / network set up or diagram would be a great help. Thanks in advance for your time, effort and knowledge. Dave Link to comment Share on other sites More sharing options...
Fisherpete Posted April 7, 2016 Report Share Posted April 7, 2016 I would make a run over to Radioworld and have a chat with them Dave, they should point you in the right direction with what cables, hub etc. and have all the parts you need to get set up. Link to comment Share on other sites More sharing options...
Mister G Posted April 8, 2016 Report Share Posted April 8, 2016 I haven't had Humminbird equipment since the late 70's so I really can't be much help personally. However, look at these two links and you should get more then enough info. This is a GREAT forum for what you are looking for.....plus many other topics if you dig around, like boat trailers, trucks etc........good luck. http://www.bbcboards.net/forumdisplay.php?f=133 http://www.bbcboards.net/forumdisplay.php?f=128 Link to comment Share on other sites More sharing options...
young_one Posted April 8, 2016 Report Share Posted April 8, 2016 5-Port Ethernet Switch x1 Ethernet Adapter Cable x2Ethernet Cable x3 MKR-US2-8 UNIVERSAL SONAR 2 ADAPTER CABLE-HB 7-PIN | MFR #1852068 x1 5 Port acts like a internet modem to connect 5 different devices: ethernet - adapter cable - bow fish finder ethernet - adapter cable - console fish finder ethernet - Terrova Separately, if you like the bow fish finder to display sonar information from Terrova US2 transducer: Terrova - MKR US2 8 - bow fish finder Note: http://radioworld.ca/humminbird-m-125.html Radioworld will have everything you need, but shop around for the best pricing. 859ci HD will not display down image or side image even if connected to the network Both fish finders can not share a single map card, you will need 2 or swap between uses Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now