Problems with my Calcutta 400TE

[F_ast]

I service my reels a few times a season. Open, clean, grease and oil... regular maintenace.

 

I have had this reel open at least 5 times; but the reel has a tick and pulsation that it has never had before.

 

Upon opening the reel again after discovering the tick and pulse, it appears that the hammer looking component with the pointed head freely rotates and is able to work its way under and rub on the bail engage (dog eared) gear under the main gear. Pic included

 

Anyone have this issue before and or know how to fix it? I have played with is quite a bit and getting frusterated as I end with the same result each time.

 

Edited August 23, 2012 by F_ast

[Squid]

Take it to Aikmens and for 35 bucks he will fix it for you and you will have no headaches.

[Ron]

Don't know if this helps or not but here is the schematics.

 

http://fish.shimano.com/media/fishing/techdocs/en/CTE400_v1_m56577569830575829.pdf

 

Cheers, Ron...

[Spiel]

Well I've never worked on this particular reel, but I'm wondering if your missing a "click pawl spacer?"

Part #687 shows two of them.

[F_ast]

Got it figured out.

 

The anti reverse pawl was got engaged on the AR gear and flicking the teeth as it ran by.

 

Thanks.