Jump to content

No reverse


skeeter

Recommended Posts

I put the boat to bed last fall and every thing worked .

This weekend I get it ready to go back in .

I changed the gear oil in it, then drop it in the lake.

Fires up no problem.

Then put it into reverse, and nothing.

It goes into forward. :dunno:

Every thing under the hood looks fine and moves the way it should.

 

Second problem is that the ball on the gas line keeps going soft and loosing its prime.

It's not the tank or the line as I have tried 4 different tanks and lines on it and it is the same result.

 

:dunno: :dunno:

Link to comment
Share on other sites

I put the boat to bed last fall and every thing worked .

This weekend I get it ready to go back in .

I changed the gear oil in it, then drop it in the lake.

Fires up no problem.

Then put it into reverse, and nothing.

It goes into forward. :dunno:

Every thing under the hood looks fine and moves the way it should.

 

Second problem is that the ball on the gas line keeps going soft and loosing its prime.

It's not the tank or the line as I have tried 4 different tanks and lines on it and it is the same result.

 

:dunno: :dunno:

OOOOhh the fun......ok first you have a small air leak in the line ...could be the seal at the tank ot at the ball, next check your linkage to the gears ....Im assuming you didnt see and oil flow comming from the gear case?.

Link to comment
Share on other sites

I just went down this path.

 

fuel: I had a tiny crack in the fuel line after the fuel filter. 20 min to replace 3 hours to locate

 

Reverse: When I shift the RPM's went up but the gear failed to engage. This is tough one but likely related to linkage adjustment. 20 min to take it apart 3 hours to find the sweet spot where it all works just about perfect..

 

 

A lot of blood sweat and beer this weekend... but I'm ready now!!! just a few more days

Link to comment
Share on other sites

"It's not the tank or the line as I have tried 4 different tanks and lines on it and it is the same result."

 

So it must be a fuel line on the engine or the connector for the fuel line on the engine.

 

"..Im assuming you didnt see and oil flow comming from the gear case?. "

Nope, no oil flow.

Link to comment
Share on other sites

Krixxer- love the blood sweat and beer comment... :thumbsup_anim:

 

Skeeter- love the new avatar :rofl2: but the other one was equally as hilarious :whistling:

 

 

Good Luck with prob...hope ya get it sorted out with just a little blood sweat and beer

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Topics

    Popular Topics

    Upcoming Events


×
×
  • Create New...