Marinco 12/24 Volt Plug/Receptacle for MinnKota

[RickOnt]

I am not the sharpest tool in the Shed when it comes to wiring!! LOL

 

Anyway.

 

Now that I sold the powerdrive I am changing to a Terrova, 80 Lbs 24 Volts.

 

I have a Marinco 12/24 Volt Plug and Receptacle.

 

On the Plug there are 3 terminals 12V, 24V and -, So do I connect Red(Pos) to 24V and Black(Neg) to -? I have also read to tighten the 12V.

 

On the Receptacle there are 4 terminals A-,A+,B-,B+ Do I connect the Red(Pos) from Batt A to A+ and Black (Neg) to A-?

 

And Red(Pos) from Batt B to B+ and Black(Neg) to B-?

 

 

Thanks

Rick

[decamo]

I used this diagram when I installed my 24v Maxxum.

 

Trolling motor diagram

 

 

I am not the sharpest tool in the Shed when it comes to wiring!! LOL

 

Anyway.

 

Now that I sold the powerdrive I am changing to a Terrova, 80 Lbs 24 Volts.

 

I have a Marinco 12/24 Volt Plug and Receptacle.

 

On the Plug there are 3 terminals 12V, 24V and -, So do I connect Red(Pos) to 24V and Black(Neg) to -? I have also read to tighten the 12V.

 

On the Receptacle there are 4 terminals A-,A+,B-,B+ Do I connect the Red(Pos) from Batt A to A+ and Black (Neg) to A-?

 

And Red(Pos) from Batt B to B+ and Black(Neg) to B-?

 

 

Thanks

Rick

[RSF]

I am not the sharpest tool in the Shed when it comes to wiring!! LOL

 

Anyway.

 

Now that I sold the powerdrive I am changing to a Terrova, 80 Lbs 24 Volts.

 

I have a Marinco 12/24 Volt Plug and Receptacle.

 

On the Plug there are 3 terminals 12V, 24V and -, So do I connect Red(Pos) to 24V and Black(Neg) to -? I have also read to tighten the 12V.

 

On the Receptacle there are 4 terminals A-,A+,B-,B+ Do I connect the Red(Pos) from Batt A to A+ and Black (Neg) to A-?

 

And Red(Pos) from Batt B to B+ and Black(Neg) to B-?

 

 

Thanks

Rick

 

I'd take a close look at possible conficting amperage rating on this. Seems what your hooking up may have a much higher amperage draw than the switch plug may be rated for.

[DRIFTER_016]

Rick

I just used the wiring diagram that came in the package when I wired mine up.

I believe you are correct in your assumptions about the wiring though I would check against the diagram.