12pointer Posted February 27, 2009 Report Posted February 27, 2009 i have been thinking about getting a kiker on my boat but i need a bracket any 1 know if this is a good bracket,u can also get a mount that the bracket slides in and locks so u can take the bracket off whenever u like.
fishhunter Posted February 27, 2009 Report Posted February 27, 2009 ok for 2 stroke but not 4 here have a look lots out there.http://www.westmarine.com/1/1/21135-4-stroke-auxiliary-outboard-bracket-from-garelick.html
Fishn Technishn Posted February 27, 2009 Report Posted February 27, 2009 Been there ...done that! Went thru this "mounting scenario" last year. I asked many questions from many experts on MANY "boards" and best advice was to mount the motor directly to the transom ....if possible. I don't have all the stuff from last year but if you have to use a bracket there is a quick connect bracket so you can remove the whole thing quickly. Will see if I can remember the name. FT
wallyboss Posted February 27, 2009 Report Posted February 27, 2009 (edited) If you are going to put a 2 stroke Merc be careful here is something I did to mine. Cause if you tilt up a Merc 2 stroke you will hit and possibly break your gas connection with the small lever at the front of the bracket. And it can very quickly ruin a day of fishing. But after the change I did to mine it works great. But I agree if you can mount it straight to the transom it's a lot better but some boats it's just not doable like mine. Edited February 27, 2009 by wallyboss
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now