Jump to content

Recommended Posts

Posted

Good Morning All, I have a little issue on my hands and wonder if any words of advise could be had. I have a 2002 176 Prince Craft, the issue I have is main cranking battery terminals have poor contact due to heavy oxidiation on the Red motor wire. At times I have to use a wire brush to get the green crud off the terminal. The differance between the red and black terminals is the black seems to be steel or aluminum and the red is copper. Any words of advise would be welcome.

 

Thanks

 

Ken

Posted

Look at swithching over the sonnection of the red terminal. If its copper it will oxidize due to moisture quickly. Look at the wiring also above the connection to make sure that is okay also. Change it over to a similar connector as the ground possibly a different size so it is easily noticeable. Also if you need to change or mend the wiring make sure you use the appropriate gauge wire, should be 6 gauge but check. Tape up the new conection and clean off battery and you should be ready to go.

Posted

I am glad you asked the question my rig wouldn`t start on Saturday and there was some oxidation on my battery cable, apparently it forms when a connection is not tight enough I am sure one of the experts here will have a remedy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Topics

    Popular Topics

    Upcoming Events

    No upcoming events found

×
×
  • Create New...