Christopheraaron Posted June 17, 2012 Report Posted June 17, 2012 2 quick questions for the fly fishers. My first is that I have a super cheap shakspeare fly reel that I would like to try to turn into a float reel, i understand it won't end up too smooth but I just want to get a feel for them. How would I do this? The second is that I'm having trouble landing dry flies. I have always been able to fish them but lately the fly line has actually been sinking? Any theories? Thanks, RHF.
Jacob Posted June 17, 2012 Report Posted June 17, 2012 Sometimes fly lines start to wear out and will sink near the tip section, there are two ways to fix this first clean your line with soap and warm water if that doesn't fix it you can use some dry fly floatant every few casts. Other than those you might just have to buy a new fly line. Jacob
misfish Posted June 17, 2012 Report Posted June 17, 2012 How old is the line? As for the float reel thing,I believe it will be to small. I have one in the classifieds for a great price.You can get your money back Im sure,if you decided you didnt like it,and wanted to resell it.
Ralph Field Posted June 17, 2012 Report Posted June 17, 2012 To turn your fly reel into a center pin you have to remove every thing inside. When you put it on a rod put an elastic around the handle of the rod and stretch it to the handle of the reel.
Christopheraaron Posted June 17, 2012 Author Report Posted June 17, 2012 How old is the line? As for the float reel thing,I believe it will be to small. I have one in the classifieds for a great price.You can get your money back Im sure,if you decided you didnt like it,and wanted to resell it. The line is only about 3/4 of a year old but heavily used.
Ralph Field Posted June 17, 2012 Report Posted June 17, 2012 I would take a serious look at misfish's reel if you want to try pinning. You will never find a cheaper reel and you will be able to sell it for what he is asking. Your conversion would suck compared to his reel.
cuzza Posted June 18, 2012 Report Posted June 18, 2012 The line is only about 3/4 of a year old but heavily used. If it's sinking after a few casts it could be getting water in the core. Normally happens if you don't have a welded loop on the end, water will soak into the open end of the line otherwise you may have a crack in the coating. Can take a while to dry out, then seal it up with epoxy or aquaseal.
Christopheraaron Posted June 18, 2012 Author Report Posted June 18, 2012 thanks cuzza, I have noticed some abrasion on the line and suspected that might be the reason.
misfish Posted June 18, 2012 Report Posted June 18, 2012 I would take a serious look at misfish's reel if you want to try pinning. You will never find a cheaper reel and you will be able to sell it for what he is asking. Your conversion would suck compared to his reel. Thanks Staffman. I would even meet up at BPS, if he was interested in buying it. Like I said,dont need to sell,but if it gets a young angler out there,it,s worth it.
Christopheraaron Posted June 18, 2012 Author Report Posted June 18, 2012 I really need the money for other equipment right now, I just thought that if I had one anyways why not give it a shot. I'm sure that you'll find someone to buy it, if I remember correctly smalliefisher was looking for one.
Dabluz Posted June 19, 2012 Report Posted June 19, 2012 2 quick questions for the fly fishers. My first is that I have a super cheap shakspeare fly reel that I would like to try to turn into a float reel, i understand it won't end up too smooth but I just want to get a feel for them. How would I do this? The second is that I'm having trouble landing dry flies. I have always been able to fish them but lately the fly line has actually been sinking? Any theories? Thanks, RHF. I would trim back the fly line about 6 inches and make a new nail knot with a very short section of 20 lb test mono and add a perfection loop about 2 or 3 inches from the end of the fly line. It's evident that the outer coating on the fly line is cracked and water is soaking into the core of the fly line. I also grease the end of my floating fly lines with a silicone grease.....the stuff that you use to waterproof leather boots. When fishing with very long fine leaders and tiny dry flies, I even grease the leader except the last 20 inches or so.
Christopheraaron Posted June 19, 2012 Author Report Posted June 19, 2012 sorrym would you have the perfection loop attached to the leader or the nail knot?
misfish Posted June 19, 2012 Report Posted June 19, 2012 Now that I have the loop to loop down to 5 mil,I dab the main line with crazy glue.Seals the end,not allowing water in. Still much to learn.
Christopheraaron Posted June 19, 2012 Author Report Posted June 19, 2012 Thanks misfish, I tried converting my fly reel, stripped everything from it, let's just say it's still got some work to do LOL!
Dabluz Posted June 20, 2012 Report Posted June 20, 2012 sorrym would you have the perfection loop attached to the leader or the nail knot? Actually, you use a perfection loop at the end of the short piece starting at the nail knot and you have another perfection loop at the start of the leader. The loop to loop connection allows you to change leaders according to the size of the fly and wind conditions. Under slight wind or calm conditions when using a size 20 fly or smaller, I often use leaders up to 18 feet long and a tippet strength of 3/4 to 1 lb test. It's great for those real big brook trout who wander around near the middle of the lake sipping tiny flies late in the summer. It's mostly a matter of spotting one feeding, paddling out in a canoe without making the slightest noise and casting delicately in front of the fish. I use the Ritz method of making my fly leaders.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now