hogsmally Posted March 6, 2007 Report Posted March 6, 2007 I have a St. Croix Avid that has a tip that has become worn and frays my line. I want to replace this tip. With a rod like the St. Croix, can I just heat the tip and pull it off, or is there anything else I need to know? I have ordered a new tip, I was just wondering if anyone had any experience with the schematics of a St. Croix Avid. Getting the new rod tip back on will not be a problem. I know there is a lifetime warranty on the avid, but it requires almost $40 shipping and handling. I can do it on my own much cheaper if I can figure it out. Thanks in advance Lumberjack
FishFinder Posted March 6, 2007 Report Posted March 6, 2007 isnt it an over the counter exchange for the avids?
cplummer Posted March 6, 2007 Report Posted March 6, 2007 (edited) i'm a custom rod builder .. Simply heat the tip and pull it off.. to replace it shave very thin pieces of hot glue...stuff it in the new tip with a sewing pin then heat and slid back on and make sure it's straight before it hardens . you'll only have a few seconds..if your close to niagara i will do it free and will take under a min... cliff... Edited March 6, 2007 by cplummer
JPD Posted March 6, 2007 Report Posted March 6, 2007 (edited) Lifetime warranty on Avids Dude. Over the counter at a good dealer. Get a new one. JP Edited March 6, 2007 by JPD
Aaron Shirley Posted March 6, 2007 Report Posted March 6, 2007 The Lifetime warranty on the Avid rods are for the blank, not guides. Some tackle stores will have the glue and do this service for free, like Burns Fishing in Burlington adn Fishing World in Hamilton. It only takes a minute like Cliff said. You can do it yourself if you are careful. I have done it to one of my rods before, although it wasn't as pretty as Burns work lol. Aaron
crusty Posted March 6, 2007 Report Posted March 6, 2007 I think I'm the only guy here who doesn't have his own tv show!
tonyb Posted March 6, 2007 Report Posted March 6, 2007 I think I'm the only guy here who doesn't have his own tv show!
hogsmally Posted March 6, 2007 Author Report Posted March 6, 2007 Yeah, the warranty does not apply for the rod guides "normal wear and tear". Also, the St. Croix website claims that warranties cannot be handled at dealers. They say you can only send the rods back to the company with $20 for shipping charges. Then they choose to fix or send you new. Anyway, thank you for the info. I found a local shop that said he would do it for free. I cannot believe how willing to help the people on this website are. Unbelievable. Thanks again for the responses Lumberjack
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now