sandmann Posted March 22, 2010 Report Share Posted March 22, 2010 (edited) I have an old chronarch bantam, it was my first caster bought many years ago. This reel has been on alot of fishing trips and has the scars to prove it. I love this reel and just can't seem to part with it, I feel it out performs alot of the newer reels out there on the market today. With that being said I'm looking for some helpful advice and tips on painting reels (baitcaster). If anyone out there has taken on such a project and might be able to assist me with some advice that would be greatly appreciated, Thanks in advance. Edited March 23, 2010 by sandmann Link to comment Share on other sites More sharing options...
Muskieman Posted March 22, 2010 Report Share Posted March 22, 2010 .. Take the reel apart and clean the desired surfaces with a de-greaser.. Non chlorinated brake clean works well.. DO NOT USE ON PLASTIC!!! If all paintable parts are alloy or aluminum this works well. #1 clean as above. #2 strip old paint off with paint remover & re-clean with degreaser #3 slightly scuff desired parts with a Norton Red scuff pad. #4 apply 2 light coats of Zinc-Chromate primer #5 apply thin coat of automotive red or gray acrylic primer{depending on surface color} #6 wet sand with 2000 grit to a smooth surface #7 choose an automotive acrylic enamel finish @ CTC your preferred color . #8 apply two thin coats of chosen paint #9 repeat steps 6 and 8 x2 #10 go back to CTC for a can of Acrylic Enamel clear #11 repeat step 9 #12 apply a wet coat of clear. #13 let dry and re-assemble reel. Worked for me. RFS Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now