O/T Machinist or mechanics

[Uncle Buck]

to drill the easyout, use a carbide drill (masonary one will work fine...)

 

as for pulling the old bolt out... you're in a bit of a pickle there....

 

you'll probably have to drill a hole through the bolt and die grind it out... then rethread the hole with a tap

[Out4Trout]

Here's an old trick that works really well...

Take the door off, then place a 1/4 nut over the bolt and easy out.

Tack weld the inside of the nut to the easy-out and bolt.

 

Before it has completely cooled, use a wrench on the nut - and turn

the bolt out of the hole.

 

Hope this helps - it's worked wonders for me...